How to properly connect a digital set-top box to an old TV

Plasma TVs have long since replaced the old TVs. Modern models already have a built-in tuner for signal conversion. If you continue to use an outdated TV device, then you need to figure out how to connect the set-top box to an old TV to receive digital television.

Why do users have a problem how to connect an old TV to digital TV

The question related to how to set up a set-top box for receiving digital television arises if it does not have a built-in signal decoder. To understand if the device has a built-in decoder, it is recommended to read the user manual. It should contain the
DVB-T2 broadcast standard .

In 2019, a large-scale transition from analog TV to digital was carried out in Russia. Since that time, the owners of kinescopic receivers have lost the opportunity to watch TV without a special DVB-T2 set-top box.

Old “boxes” are not able to independently perceive the digital format. And the connected receiver performs several purposes at once and serves to decode the signal, as a dashboard and set up multimedia content. For example, advanced models allow you to connect a flash drive. The cost of the DVB-T2 set-top box is in the range of 800-1500 rubles. The price depends on the manufacturer’s rates and the functionality of the receiver. In any case, buying a digital tuner will cost less than a new TV panel. On such a device there are all the necessary connectors for connecting to an old television set.
However, before buying, it is recommended to compare the availability of the corresponding inputs and outputs so that you do not have to use adapters. Otherwise, you should figure out how to connect the input from the HDMI receiver to an old TV through tulips. You should also examine the package bundle of the tuner, as it may not include the desired cable.

Connecting the set-top box to an old TV – all methods in detail with photos and diagrams

Owners of outdated appliances are concerned about the question of how to connect and configure a digital set-top box to a TV. This requires the use of additional equipment. It is designed to receive and decode a TV signal. The choice of such a device depends on the format of television broadcasting – cable, terrestrial or satellite.
Firstly, an old TV needs a special set-top box to receive digital television. So, you need to purchase a tuner to convert the signal according to the DVB standard. To connect the connectors, you can use the RCA connector. Accordingly, connecting wires will be required. If this is a kinescopic television receiver, you will need to get a special adapter and an RF modulator. F-plugs are put on the end of the antenna cable.

It is important to position the antenna correctly. It should be deployed towards the repeater. After clearing out how to connect a digital set-top box to an old TV with three tulips, you can start assigning numbers using the remote control. Another way to connect a digital set-top box to an old Samsung, Philips or Panasonic TV to a TV is to use the SCART jack. This connector is more compact compared to the “bells”. But at the other end it has tulip entrances.

How to connect a digital set-top box to an LG TV

To do this, inspect the back of the TV receiver for the presence of appropriate connectors.
Then perform the following sequence of actions:

1. Connect the cable to the appropriate socket on the TV.
2. Connect the antenna to the set-top box to receive the signal.
3. Turn on both devices to the network and start auto search for channels.

How to connect an old LG TV to a digital set-top box: https://youtu.be/f7x5zxtud_U

We connect Panasonic

The algorithm of actions on how to set up channels on a Panasonic TV is quite simple. The user needs to go to the menu, then select the “Settings” tab. Then go to the “DVB-C setup menu” item. Then select the autotuning mode and click the OK button. When the scan is completed, the first channel found in the list will automatically turn on.

Samsung TV connection

Step-by-step instructions on how to connect a digital set-top box to a Samsung TV through tulips include:

1. Connect the antenna cord to the receiver.
2. Connect the tuner and TV panel using the selected cable connection method.
3. Insert the other end of the antenna wire marked RF-Out into the connector on the TV.
4. Turn on both devices, and select the appropriate broadcast source in the TV receiver menu.
5. Perform an automatic search for channels and save the found list.

After connecting the wires, users have a question about how to set up a set-top box for 20 channels on an old TV:

1. Turn on the tuner and TV.
2. Enter the receiver menu using the remote control from it.
3. Select your country and type of DVB-T2 broadcast.
4. Enable auto search and wait for the scan to complete.
5. After that, you need to save the found programs.

How to connect an old TV to a digital set-top box – video instructions for connecting an old TV to a receiver: https://youtu.be/f7x5zxtud_U

Problems and solution

If, after connecting a digital receiver, the image begins to freeze or disappear, this indicates a poor quality of the TV signal. To fix this problem, reposition the antenna so that it points towards the repeater. If the tower is located at a distance of 5 km, then you will need to install an additional amplifier. Since the quality of the signal directly depends on the remoteness of the antenna.
The strength of the transmitted signal [/ caption] It may also be necessary to replace the connecting wires if the contact in the connector has burned out during operation. To eliminate this possibility, it is necessary to conduct a visual inspection in order to detect damage to the wires. Another reason may be that the TV does not see the receiver. Then you need to make sure that the plugs are connected correctly and the tightness of their connection. If this does not help, it is recommended to connect the connectors to another receiver. When the device does not recognize an external device, it is advisable to exchange it in a store under warranty. If the picture on the screen is shown in black and white, this indicates a breakdown of the receiver. This may be due to a weak signal, disconnected wires, or selecting the wrong aspect ratio. On older kinescopes, monochrome image reproduction is set by default. In this case, you need to switch to AUTO or PAL mode. If the channels are completely absent after connecting the set-top box, this is a consequence of incorrect equipment settings. To correct the situation, you need to re-wire the connection. It happens that channels are broadcast, and then suddenly disappear. This problem occurs as a result of technical work on the TV tower that transmits the signal. In this case, it remains to wait until the interference stops. If only some TV channels are missing, this indicates a change in frequencies. In this case, it is recommended to perform a second search using the appropriate function in the TV settings. The absence of sound in the presence of a picture indicates that that the TV does not support stereo audio format. The solution to the problem may be the purchase of an additional adapter.
Through the set-top box, you can connect digital television to two old TVs [/ caption]

If auto channel search does not work

When answering the question of how to set up channels on a 20-channel digital set-top box manually, you must first complete the cable connections to the corresponding connectors. This method will help if autosearch does not return results. You should do the following:

1. Call the menu using the button of the same name on the remote control.
2. Select the line “Search for channels” in the presented list of settings.
3. Switch to manual tuning mode.
4. Specify the desired frequency range depending on the region of residence.
5. Start scanning and wait for the process to finish.
6. Save the package of found TV channels. You can rearrange or group them as you wish.