Yi-da-kanka samar da alkuki don plasterboard TV

Idan babu isasshen sarari a cikin dakin kuma ba a bayyana inda za a saka sabon babban TV ba, wani busasshen bangon bango zai magance matsalar. Wannan ra’ayin yana adana sarari kuma yana ba ku damar aiwatar da ra’ayoyi marasa iyaka. Irin waɗannan niches suna da sauƙin kera, don haka ko da novice masu sana’a na iya gina su.

Menene drywall?

Drywall (GKL) kayan gini ne wanda ya ƙunshi yadudduka na kwali da yawa da kullu ɗaya na gypsum. Wannan abu mara tsada da sauƙin aiki ana amfani dashi ko’ina don ƙulla filaye, sassan gini da rufi. Faɗin takarda – 120 cm
Fa’idodin wannan abu:

• cheapness – GKL ya fi rahusa fiye da dutse, filasta, itace;
• sauƙi don jigilar kaya – daidaitattun zanen bangon bushewa cikin sauƙi cikin mota;
• nauyin nauyi na kayan abu;
• sauƙi da babban saurin shigarwa – babu buƙatar knead mafita na musamman, putty ko manna a saman;
• yana daidaita zafi a cikin dakin;
• rashin komi.

Minuses:

• rashin zaman lafiya a gaban ruwa – kayan ya zama jika kuma ya lalace;
• m.

Aiki mai amfani na plasterboard TV alkuki

Niches na plasterboard sun fi arha fiye da kayan da aka yi na al’ada. Suna da sauri da sauƙi a ɗora su, kuma za ku iya yin su da kanku, gwadawa, gano sababbin hanyoyin ƙirar ƙira da siffofin. Gina allon gypsum yana ba da cikakkiyar fasahar talabijin. Lokacin ƙirƙirar shi, wajibi ne a yi la’akari da ma’auni na TV da kuma tabbatar da gyare-gyaren da ya fi dacewa a bango. Babban ayyuka na drywall niches:

• hutun tsari yana hana TV daga faɗuwa;
• za a iya amfani da shi don sararin yanki;
• tare da TV, ana iya shigar da kayan aikin sauti a cikin alkuki – kuna samun gidan wasan kwaikwayo na gida;
• a cikin alkuki zaka iya shigar da ɗakunan ajiya don abubuwan tunawa, littattafai, kayan haske;
• a cikin waya mai bushewa, yana yiwuwa a ɓoye wayoyi, ginanniyar hasken wuta, kwasfa, sadarwa daban-daban da rashin daidaituwa na bango;
• idan an shigar da niche a cikin ɗakin abinci, ana iya amfani dashi lokaci guda don shigar da TV, jita-jita, kwalabe, kayan ado.

Lokacin amfani da kayan adon, busassun bangon bangon bangon bangon bango yana da tsada, mai salo, bayyane. A lokaci guda, suna ɗaukar sarari ƙasa da ƙasa fiye da rataye shelves, kabad ko tsaye.

Niche Design Tips

Ƙirƙirar alkuki yana buƙatar takamaiman ilimi, ƙwarewar kayan aiki, da kuma tunanin ƙirƙira daga mai aikin gida. Kwararrun “na gida” suna ba da shawara ga masu farawa – suna da nufin hana kuskuren kuskure da za a iya yi yayin ƙirƙirar busassun bango. Nasiha ga masu farawa:

• la’akari da nauyin TV, idan yana da nauyi sosai, yana da kyau a zabi tsarin katako;
• lokacin zabar wani abu, la’akari da fasalulluka na ɗakin – alal misali, a cikin ɗakin dafa abinci ya zama dole don shigar da tushe wanda ke jure yanayin zafi da zafi mai zafi;
• yanke shawara a gaba akan siffar da girman alkuki, yanke shawara nawa shelves za su kasance a cikin tsarin;
• ya kamata a haɗa zane na niche tare da salon ɗakin;
• a kwance niches ba ka damar gani tsawo tsawo ganuwar, a tsaye – don ƙara tsawo na rufi;
• kada ku tara wani alkuki tare da abubuwan da ba dole ba don kada ya haifar da rushewar sa;
• don yin ado da alkuki, yi amfani da hasken baya, yana iya zama duka na farko da sakandare.

Shahararrun nau’ikan alkukin talabijin na plasterboard

Ana yin akwatunan plasterboard a cikin nau’ikan guda uku, kuma an bambanta wani nau’in daban-daban – alkuki tare da haske, wanda, bisa ga ƙa’ida, za’a iya tsara shi a cikin kowane bayani na ƙira. Nau’in kayan kwalliyar plasterboard don TV:

• A tsaye. An shirya shi daga bene zuwa rufi. A ɓangarorin suna barin ɗaki don ƙarin tsari. Irin wannan niche na gani yana sa ɗakin ya fi girma.
• A kwance. Yawancin lokaci ana zabar su don ƙananan wurare. Suna faɗaɗa ganuwar da sarari a gani.
• Oval. Wannan zaɓi ne mafi rikitarwa wanda ke buƙatar mai yin wasan don samun wasu ƙwarewa da iyawa a cikin aiki tare da bangon bango da bayanan martaba. Ana iya amfani da da’irar maimakon oval.
• Haɗe. Suna haɗa nau’ikan nau’ikan guda biyu kuma suna wakiltar wani tsari mai rikitarwa, ginin wanda yawanci ana aiwatar da shi ta hanyar kwararru.

Wani zaɓi mai ban sha’awa shine kusurwar kusurwar da aka yi da plasterboard don TV. Yawancin lokaci ana amfani dashi a cikin ƙananan wurare – alal misali, a cikin ɗakin abinci. Umarnin don shigarwa ya dogara ne akan siffar alkuki, da sauran nuances – shelves, tsaye ko ƙananan ƙananan ƙananan don masu magana – kawai suna rinjayar rikitarwa na ƙirƙirar tsarin.

Tsarin sarrafawa

Don yin shinge mai bushewa, za ku buƙaci kayan aiki na yau da kullun, kayan aiki, masu ɗaure. Ƙirƙirar alkuki yana farawa da ƙididdiga da zane-zane, kuma tsarin shigar da alkuki don TV yana ɗaukar kwanaki da yawa – duk ya dogara ne akan basira da ƙwarewar mai yin.

Abubuwan da ake buƙata da kayan aiki

Don yin alkukin plasterboard don TV, shirya duk kayan da ake buƙata da kayan aiki a gaba. Wannan zai ba ku damar kada ku shagala da neman abubuwan da suka ɓace. Kuna buƙatar:

• busassun takarda har zuwa 12 mm lokacin farin ciki;
• kayan taimako – putty, primer, sickle;
• galvanized karfe profile;
• kayan aiki – screwdrivers, pliers, guduma, hacksaw, wuka na gini, spatula, abin nadi;
• fasteners – dowels, sasanninta na ƙarfe, abubuwan haɗawa don bayanin martaba;
• na’urori masu aunawa – ma’aunin tef, fensir, matakin;
• kayan lantarki – wayoyi, soket, masu haɗawa, sauyawa, fitilu, hannun riga mai kariya.

Aikin shiri: zane-zane da girma

Aiki yana farawa tare da ƙirƙirar zane, wanda aka yi don sikelin da kuma dacewa da sigogi na tsarin. Ana yin duk gyare-gyare kafin fara aikin gini. Zane yana nuna duk manyan girma. Ana ƙididdige su bisa ga girman TV ɗin. Alal misali, a lokacin da gina wani alkuki ga 55-inch TV, yana da muhimmanci a yi la’akari ba kawai tsawo da nisa na na’urar, amma kuma zurfin. Ya kamata ya zama 10-20 cm ya fi girma fiye da girman TV a kowace hanya – don kada kayan aiki ya yi zafi. Bugu da ƙari, TV ɗin ya kamata ya tsaya don a iya cire shi cikin sauƙi. Niches na masu magana ya kamata kuma su kasance mafi girma fiye da na’urorin da kansu, kuma ya kamata a sanya su a wani tazara daga TV. Lokacin ƙayyade girman alkuki, yana da mahimmanci a yi la’akari da waɗannan abubuwan:

• wajibi ne a bar sararin samaniya don samun iska – TV bai kamata ya tsaya kusa da bango ba;
• zane yana nuna wayoyi, hasken wuta da sauran kayan aikin lantarki – za a aiwatar da shigarwar su yayin ƙirƙirar alkuki;
• Ana zana duk bayanan martaba na ƙarfe akan zane, la’akari da kauri daga cikin kayan da shigar da masu tsalle-tsalle waɗanda ke ƙarfafa tsarin.

Shigarwa da taro

Yin amfani da mai nadawa da fensir mai sauƙi, canja wurin sigogi da aka nuna akan zanen ku zuwa busasshen bangon. Kasance daidai kuma ku guje wa kurakurai don kada ku yanke zanen gado. Yadda ake shigar da niche:

1. Shigar bayanan martaba. Lokacin da aka yi amfani da alamar, fara shigar da bayanan martaba. Ajiye su tare da ƙwanƙwasa kai tsaye – don wannan aikin za ku buƙaci rawar soja da screwdriver.
2. Gudun duk hanyoyin sadarwa – kebul, walƙiya – idan an bayar, kwasfa.
3. Shigar da zanen bangon bango. Lokacin da aka gyara bayanan martaba, ci gaba tare da shigarwa na busassun bangon bango, lura da matakan da aka tsara. Lura cewa abubuwa biyu maƙwabta yakamata su zama ko da haɗin gwiwa, kada a sami gefuna ko fiɗa.
4. A ɗaure yankan guntun busasshen bango zuwa bayanan martaba. Don ƙara girma zuwa tsarin kuma ƙara ƙarfinsa, shigar da ƙarin bayanan martaba tare da gefuna na alkuki – girman su dole ne ya dace da bayanan jagora.

Bidiyo game da shigar da kayan aikin bushewa:

Ƙarshe

Bayan shigar da alkuki, sun fara gama saman sa. Don yin aikin za ku buƙaci putty, primer, sickle. Oda na ƙarshe:

1. Aiwatar da putty zuwa gidajen abinci da kuma manne kaset na sickle.
2. Bi da duk saman da abin share fage.
3. Matakin duk saman da spatula, sa’an nan kuma yashi da yashi.
4. Sake amfani da firamare.
5. Sa’an nan kuma ci gaba daidai da zaɓin cladding, alal misali – fenti tare da fenti da abun da ke ciki na varnish.

Idan ka yanke shawarar shigar da hasken kayan ado, toshe ramuka don haɗin sa a gaba.

Sanya TV a cikin wani wuri

Mataki na ƙarshe na aiki shine jeri da haɗin TV a cikin alkuki. Wajibi ne a gyara ƙwanƙwasa na musamman wanda ya zo tare da TV a bango. A ɗaure shi da dowels ko sukurori. Idan ba a haɗa maƙallan ba, dole ne ku saya.

Ra’ayoyin don yin ado da wuri don TV mai bushewa

Akwai mara iyaka iri-iri na ƙirar bangon bushewa don TV. Abubuwan da aka aiwatar sun dogara ba kawai akan dandano da abubuwan da ake so na mai yin ba, har ma a kan manufar ɗakin, girmansa da siffofi.

A falo

Falo babban daki ne, amma ba shi da sauƙi a sami wurin TV a cikinsa. Akwai kayan daki na sama, teburi, katina, wurin aiki, kowane nau’i na shelves da ƙari. Abin da ya sa ƙananan ƙira da ergonomic ke da daraja a nan. Alamar filasta cikin sauƙi tana maye gurbin kabad ɗin bango waɗanda suka tsufa ta ɗabi’a da ta zahiri. Yana taimakawa wajen tsara sararin samaniya a hankali, kuma yana ba ku damar ganin yankin dakin.

A cikin ɗakin kwana

Aminci, annashuwa da ta’aziyya suna mulki a cikin ɗakin kwana, kuma kada a sami wani abu mai ban mamaki a nan. A nan, alkuki na TV ba kawai zai ɗauki sarari ba, amma kuma zai zama kayan haɗi mai salo na yanayi.
Niche tare da m da kuma fizilin gama zai yi kyau a cikin ɗakin kwana. Ana maraba da hasken wuta, furanni, Hotunan da aka tsara – duk wannan ana iya sanya shi a kan ɗakunan bangon bangon da ke kusa.

Akan kicin

A nan, an ba da babban wurin aiki, don haka an shigar da TV don ya dace don kallo, kuma a lokaci guda yana ɗaukar mafi ƙarancin sarari. Ana sanya alkukin don ya kasance a nesa da murhu da nutsewa, in ba haka ba ruwa da maiko zasu shiga.

Kayan Ado

Zane na alkuki da kayan adonsa kusan ba su da iyaka – yana iya samun kowane nau’i, shelves, kayan ado. Dangane da salon da ciki na ɗakin, an zaɓi kayan gamawa. Zaɓuɓɓukan gamawa:

• Zane. Zaɓin gamawa mafi sauƙi shine fenti tsarin da aka ɗora tare da fenti. Amma kafin fara aiki, ya zama dole don sanya tushe, smoothing fitar da duk gidajen abinci da fasteners. Don cimma babban kayan ado, yi amfani da filastar rubutu. Idan muna magana ne game da tsattsauran ra’ayi da kuma na gargajiya, an zana niche a cikin launi wanda ya dace da ganuwar ɗakin. Idan an yi wa ɗakin ado a cikin salon zamani, yi amfani da launuka masu haske da kyan gani.
• Wallpaper. Ana ba da shawarar manna a kan busasshiyar bangon bango tare da fuskar bangon waya aboki – suna cikin tarin kusan kowane iri. Yanayin shine haɗuwa da nau’i-nau’i daban-daban da alamu.
• A dutse. Don sutura, ana amfani da sigar haske – dutsen wucin gadi. Ya fi nauyi a cikin nauyi, kuma a zahiri ba a iya bambanta shi da na halitta.
• Itace. Don kammalawa, katako mai haske ko kwaikwayo sun dace. Ya dace don amfani da bangarori na katako, alal misali, rufi.
• Ƙarshen ado. Ana amfani da zaɓuɓɓukan ƙira iri-iri don shi – mosaics, zane-zane, gilashin gilashi da abin saka madubi, stucco, tsarin polyurethane, stencils, zaku iya ba da kyan gani don TV, datsa shi da tubalin ado.

TV niche lighting

Hasken baya shine sanannen bayani wanda ke ba ku damar cimma sakamako mai ban sha’awa na ado a hanya mai sauƙi. Ana amfani da shi a cikin nau’o’in abubuwa na ciki, kuma ya dace da kayan ado na plasterboard. Siffofin niches na TV na baya:

• Ana ba da shawarar fitilun LED masu aminci na nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan nau’ikan suna ba da shawarar – fitilun fitilu, tube diode ko garland;
• Zaren neon suna kallo mai ban mamaki – suna ba da haske, haske iri ɗaya;
• yawanci ana ba da izinin kaset da zaren tare da kewaye, sanya su a bayan kayan aiki, tare da ƙarshen niche da kuma cikin sasanninta na ciki na shelves;
• ya kamata a nuna haske zuwa bangarorin ko zuwa bangon gaba, amma ba a cikin dakin ba – don haka babu wani tasiri na makanta;
• Yawancin lokaci ana shigar da fitilun tabo a cikin sassa da yawa, sanya su a wasu tazara;
• Mafi kyawun inuwa mai haske yana dauke da farin haske.

Baya ga farin haske, zaku iya amfani da sautunan launin rawaya – suna sa yanayin jin daɗi da annashuwa. Neon tabarau na shuɗi, kore, ja, purple ana bada shawarar yin amfani da su kawai a cikin falo kuma a kashe lokacin kallon TV.

Tukwici Mai Zane

Masu zane-zane suna ba da shawara, lokacin da suke ba da kayan aiki, don yin la’akari da fasalulluka na ciki don kada ya zama wani abu mai ban mamaki a cikin dakin. Ƙarin shawarwari daga masu ƙira:

• Girman busassun niche bai kamata ya mamaye fiye da kashi uku na bango ba;
• idan an saita hasken baya, kada ya kasance mai haske sosai, kuma launi na fitilu kada ya bambanta da tsarin launi na ɗakin;
• kafin hawa alkuki, tabbatar da ƙirƙirar zane kuma bi shi sosai;
• jin kyauta don amfani da yiwuwar shirya ƙarin ɗakunan ajiya – za ku iya sanya abubuwa masu kyau da amfani da yawa akan su;
• idan kun shirya wani alkuki wanda ke mamaye sararin samaniya daga bene zuwa rufi, za ku kawo daki-daki mai ban sha’awa ga ƙirar ciki;
• zaka iya yin alkuki a cikin nau’i na kabad – don ɓoye TV a can bayan kofofin ko labule;
• yi amfani da zane don TV tare da slats, kuma TV kanta za a iya tsara shi – amma irin wannan aikin ya kamata a ba da shi ga masu tsarawa;
• kirjin aljihun tebur tare da alkuki a ƙarƙashin TV – haɗin cin nasara wanda ke ba ku damar amfani da sarari da riba;
• niche don TV da aka yi da laminate yana da kyau a cikin zamani na zamani – sun gama bangon ciki na tsarin plasterboard.

Mutane da yawa a yau suna yin watsi da TV ɗin su don neman na’urori. Har ila yau, ya faru cewa an yi wani alkuki, amma saboda wasu dalilai ba za a iya shigar da TV a can ba. Sannan zaku iya sanya wani abu a ciki don kada wurin ya bace a banza. Yadda ake cika alkuki a bango maimakon TV:

• yi ado da panel na masana’anta ko kayan ado;
• shigar da madubi;
• shirya wani murhu na ado;
• sanya akwatin kifaye
• shigar da keji tare da tsuntsaye ko dabbobi;
• rataya hoto, rukunin hoto, hotuna da aka tsara;
• sanya vases masu salo tare da furanni ko shirye-shiryen furanni.

Shin yana yiwuwa a saya kayan da aka shirya don TV?

Amfanin niche bushewa shine ƙananan farashi da yiwuwar aiwatar da ra’ayoyi iri-iri. Suna da kyau saboda kowane mai sana’a na gida zai iya gina kansa da kansa daidai ƙirar da yake buƙata. A lokaci guda, akwai sabis don shigar da akwatunan bushewa da niches, kuma idan aiki tare da kayan aiki ba shine ƙarfin ku ba, zaku iya tuntuɓar kamfanin da ya dace kuma ku ba da umarnin shigar da kowane ginin bangon bango. Kudin akwatunan bangon bango – 300-400 rubles. kowace mita gudu. Drywall abu ne mai araha kuma mai lalacewa wanda ko da mafi yawan ƙwararrun ƙwararrun ƙwararrun gida na iya aiki da su. Samun ƙananan ƙwarewa a cikin aiki tare da kayan aiki da kayan aiki, za ku iya ƙirƙirar daki-daki na musamman na ciki, tsara shi daidai da abubuwan da kuka ƙirƙira.