Iindlela zokuqhagamshela iVCR kwiTV yanamhlanje

Kuyaziwa ukuba ii-VCRs zemodeli yakudala ziphelelwe lixesha kwaye akusakwazi ukuzifumana kwiivenkile zeempahla zombane, kodwa kukho abantu abasenayo le ndlela. Basebenzisa izixhobo zokubukela iikhasethi apho kukho iividiyo zeeholide ezahlukeneyo, uchungechunge, iifilimu ezindala, njl. Ukudlala, kufuneka ukwazi ukudibanisa irekhoda kwiTV.

Ukulungiselela kunye neengcingo eziyimfuneko

Inkcazo yokudibanisa iteyiphu rekhoda kwiTV iyafumaneka kumaxwebhu okusebenzisa isixhobo. Uxhulumaniso lweeplagi lwenzeka ngezigaba, kodwa unokuhlangabezana nengxaki yokunqongophala kwezixhumi ezifunekayo ukudibanisa.
Ezi zixhobo zisebenzisa olu qhagamshelo lulandelayo:

• I-RCA (i-tulip);
• intambo ye-coaxial;
• Intambo ye-SCART;
• S ividiyo.

Akufanele kubekho iingxaki xa udibanisa igajethi yekhasethi kwiTV endala, kodwa kwiiTV zanamhlanje awuyi kuhlala ufumana amachweba anjalo, ngoko ke i-adapters (i-adapters) iyadingeka ukudibanisa, okuya kwenza lula inkqubo yokudibanisa.

Iindlela zoqhagamshelo

Kukho iindlela ezininzi zokunxibelelana, kodwa ezinye iintlobo zeeTV zanamhlanje azixhotyiswanga ngamazibuko ayimfuneko. Ngokomzekelo, i-Samsung ilahle ngokupheleleyo iziphumo ze-RCA, ngelixa ezinye iimodeli zeTV, ezifana ne-Philips, i-Sony, njl., ziyaqhubeka nokusebenzisa inani elikhulu leemveliso, kuquka “i-tulip”.

I-RCA (i-tulip)

Kwiimeko eziqhelekileyo, abadlali bekhasethi endala kunye neeTV zixhotyiswe ngezi ziqhagamshelo kuphela, kwiiTV zanamhlanje eli zibuko lisenokungabikho, ngoko kuya kufuneka usebenzise i-adapters. Ukuqhagamshela iteyiphu yokurekhoda nge-RCA ngolu hlobo lulandelayo:

1. Qhagamshela iplagi emthubi kwizibuko leVideo OUT kwiVCR, uze uplage elinye icala kwindawo efanayo yombala kumabonwakude ebizwa ngokuba yiVideo 1 okanye 2.
2. Qhagamshela iiswitshi zomda obomvu nomhlophe kwiswitshi yokuhambisa iaudio, emva koko uvule izixhobo kwaye ucinezele iqhosha lokudlala kumdlali.
3. Kwi-remote control ye-TV, vula i-AV, ukuba i-Menu ibonisiwe, ngoko uqhagamshelwano luchanekile.
4. Qalisa kwakhona izixhobo zokugcina useto, faka ikhasethi kwaye ujabulele ividiyo.

I-Tulip iyona ndlela yokudibanisa ixhaphake kakhulu, kodwa ukuhanjiswa kwesignali kuthathwa njengobuthathaka, ngoko ividiyo kunye nomgangatho wesandi uyancipha xa ujonga, into kuphela enokuyenza ukuze kuphuculwe isignali yesandi kukudibanisa i-headset ye-stereo (izithethi okanye i-headphones).

ISKART

Eli zibuko likuvumela ukuba ukhuphe imifanekiso kunye neziphumo zesandi kumgangatho ondilisekileyo, kodwa njenge “tulip”, iphelelwe lixesha, kwaye awufane ufumane eli zibuko kumabonwakude wale mihla, ngoko ke iSCART-RCA okanye iSCART-USB iadaptha zihlala zisetyenziswa. . Isixhobo siqhagamshelwe ngolu hlobo lulandelayo:

1. Qhagamshela intambo ye-SCART kwiijekhi zeteyiphu rekhoda kunye ne-TV. Ukuba usebenzisa iadaptha kwiqela lenjongo yeTV, qhagamshela iplagi kwiRCA okanye kwi-USB.
2. Faka ikhasethi yevidiyo, kwaye kwiisetingi zeTV, khetha umthombo wesignali – RCA, SCART okanye USB.
3. Imixholo yekhasethi yevidiyo kufuneka ivuleke kwiscreen seTV. Ukuba oku kuyenzeka, ngoko unxibelelwano luphumelele.

Kwimeko yokungaphumeleli, qhawula izixhobo kwinethiwekhi, uze uzame ukudibanisa kwakhona, faka i-cassette yevidiyo kwaye usethe imisebenzi eyongezelelweyo ukuphucula umgangatho womfanekiso kunye nesandi.

Intambo ye-coaxial

Olu lucingo lonxibelelwano olukuvumela ukuba usasaze usasazo ngeempawu ezininzi ezikumgangatho ophezulu. Ifanelekile kwiiTV ezininzi ezifana ne-Samsung, LG kunye ne-Sony. Ukuqhagamshela, landela imiyalelo:

1. Nxulumanisa iplagi kumdlali RF/Coax Out port kunye nenye kwi-TV RF/Coax In Jack.
2. Vula izixhobo kwaye ucinezele iqhosha lokudlala, qalisa ukukhangela isitishi ngemenyu yolawulo olukude lweTV.
3. Emva kokubona i-reception frequency ye-tape recorder, yigcine phantsi kwayo nayiphi na inombolo efanelekileyo, oku kuya kunceda ukuphepha isidingo sokuphinda udibanise umdlali.
4. Faka ikhasethi kwaye ulungise umgangatho we-odiyo kunye nokuchasana kwemifanekiso.

Ukungalungi kolu xhulumaniso kukungaphumeleli kwexesha leshaneli, kuba izixhobo ezindala ziye “zaphukile” izibuko, ngoko ke isibonakaliso sihlala sifunyenwe ngokungachanekanga. Ukuba oku kuyenzeka rhoqo, kufuneka ubuyisele izihlanganisi ezintsha.

S-ividiyo

Kulo xhulumaniso, i-adapter eyongezelelweyo iyadingeka, kuba ukutshintshwa komda womdlali uqhagamshelwe kwimveliso ye-antenna port, iiplagi ngokwazo zinombala wombala, oya kuququzelela ukusebenza kokufakela. Uqhagamshelo lwenziwa ngokwale migaqo ilandelayo:

1. Faka iiplagi ezinemibala kumdlali, ukujonga izihlanganisi ezichanekileyo. Qhagamshela ezinye iziphelo kwiadaptha ye-S-Video.
2. Xhuma iplagi ephambili ye-adapter kwisiphumo se-antenna, uze uye kwimenyu ephambili kwaye ucinezele i-AV, kwiiTV ezintsha, igama lomdlali liya kuba “i-S-Video Out”.
3. Igama leVCR liya kuboniswa kwiscreen. Emva koko, faka ikhasethi kwaye ukhangele ukuba yonke into isebenza ngokufanelekileyo.

Emva kokufakela, qhawula izixhobo kwinethiwekhi imizuzu embalwa, emva kokuyivula, cwangcisa idatha efunekayo (umqondiso wesandi kunye nomfanekiso). Le ntambo ithathwa njengeyona nto ibhetele kuba ukuhanjiswa kwevidiyo kunye nesiphumo sesandi sinamandla ngakumbi.

Ungayiwisa njani i-eriyali xa uqhagamshela iVCR?

Ukudibanisa i-VCR kwi-TV ngaphandle kokukhupha intambo, kufuneka uthenge ibhokisi elimiselweyo eliza kusebenza njenge-adapter, kunye nokuthenga iintambo ezimbini zeRCA kunye nekhebula elilodwa le-coaxial. Umdibaniso wenziwa ngolu hlobo lulandelayo:

1. Xhuma intambo ye-coaxial kwi-Cable Out jack kwi-tuner kunye ne-RF In kwirekhoda yeteyiphu.
2. Qhagamshela iiplagi “ze-tulip” kwi-Audio Out kunye neVidiyo ephumayo kwi-set-top box, nakwi-Audio In kunye nevidiyo kwiziphumo kwi-tape rekhoda.
3. Qhagamshela iingcingo eziseleyo kumabonwakude nakwisidlali sevidiyo, vula imenyu yeTV uze ufumane “umthombo wokusasaza idatha”.
4. Fumana igama leVCR kwimenyu kwaye ufake ikhasethi. Ukuba unxibelelwano luchanekile, imixholo yemidiya iya kuboniswa kwiscreen.
5. Qalisa kwakhona i-hardware.

Kubalulekile ukukhumbula ukuba ngaphambi kokwenza nayiphi na into, izixhobo kufuneka zicinywe kwinethiwekhi yombane, oku kuya kuthintela ukuba kunokwenzeka umjikelezo omfutshane okanye umonakalo kwisixhobo.

Indlela yokukhangela uqhagamshelwano?

Emva kokudibanisa izixhobo, khangela umsebenzi kufuneka wenziwe, oku kuya kuqinisekisa ukuba izenzo zenziwa ngokuchanekileyo. Omawukhangele:

• Ukuba uxhulumaniso lwenziwe nge-coaxial wire. Kufuneka uvule iteyiphu rekhoda kunye neTV. Xa isikrini seTV singena kwimowudi yokulinda, kufuneka ufakele ikhasethi kwaye uqalise ukudlala ividiyo. Ukuba yonke into ilungile, emva kokucima izixhobo, iTV itshintshela ngokuzenzekelayo kusasazo oluqhelekileyo lwesitishi. Ukuvula ngakumbi irekhoda yeteyiphu, kufuneka ucofe Dlala kwaye ukhethe inombolo apho useto lwerekhoda yevidiyo lugcinwe khona.
• Ukuvavanya intambo ye-RCA. Kuyimfuneko ukucofa iqhosha elithi Source kwi panel yolawulo yomdlali. I-TV kufuneka iye kwimowudi yokulinda. Ukuba uxhulumaniso alwenzeki, kufuneka ukhangele ukufakela okuchanekileyo kweeplagi kumazibuko. Imibala yeetheminali kufuneka ihambelane nemibala yeeplagi. Emva kokuba kufuneka ufake imenyu ye-AV, ukurekhoda kwekhasethi yevidiyo kuya kuboniswa kwisikrini, emva koko kufuneka ukhethe ividiyo oyifunayo kwaye ucinezele iqhosha elithi Dlala.
• intambo ebomvu. Ikuvumela ukuba uqhagamshele izixhobo ngexesha elinye, kuba oku kufuneka usebenzise iqhosha loMthombo. Iphaneli ephambili iya kuvela kwisikrini, apho useto olulandelayo lokudlala ikhasethi yevidiyo luya kuboniswa.

Qinisekisa ukuba iingcingo zifakwe ngokuqinileyo, isignali engenayo, umgangatho wesithombe kunye nemiphumo yesandi kuxhomekeke kule nto.

Ubunzima obunokwenzeka

Ukudibanisa i-VCR kwi-LG, Philips, i-Samsung TVs (ngokuthe ngqo okanye ukusebenzisa i-adapter) ilula kakhulu, into ephambili ayiyikubhidanisa igalelo kunye nemveliso, kodwa ezinye iingxaki zobugcisa zinokuvela.

Akukho ziqhagamshelo

Eyona ngxaki ixhaphakileyo zizihlanganisi ezahlukeneyo kwirekhoda yeteyiphu kunye neTV. Kule meko, i-adapters ekhethekileyo iya kunceda, eya kwenza lula inkqubo yokudibanisa. Zeziphi iiadaptha ezifanelekileyo:

• ISIKHOKELO-ISIKHIWO. Le ntambo iyafuneka ukuba iisokethi zeTV kunye neVCR ziyafana.
• I-SCART-RCA. Kwimeko apho umdlali unemveliso “ye-tulip”. Olu cingo lolona khetho lungcono, kuba ukutshintshwa komda kubonisa ividiyo kunye nesandi ngexesha elifanayo.
• I-S-Video-SCART-2RCA. Ukuba i-TV inamazibuko amaninzi, kunye ne-tape recorder yi-RCA kuphela. I-S-Video wire ayikwazi ukuhambisa i-audio, ngoko ke intambo eyongezelelweyo ye-2RCA kufuneka ifakwe.

Igama lokuqala iplagi yeTV, igama lesibini liyizibuko elisetyenziswe kwiVCR, ngoko ngaphambi kokuthenga i-adapter, jonga ngokucophelela amagama echweba kuzo zombini izixhobo.

Akukho mqondiso

Ngokuqhelekileyo, emva kokudibanisa umdlali wevidiyo omdala, kukho ingxaki efana nokungabikho komqondiso. Oku kunokuxhomekeka kwizinto ezahlukeneyo. Izizathu zisenokuba zezi zilandelayo:

• Iphaneli yeTV ayisetwanga ukuba ifumane umqondiso ovela kwiteyiphu rekhoda. Kule meko, kufuneka uye kwimenyu yeTV kwaye ufumane “izixhobo ezikhoyo” kwiphaneli. Cofa i-AV, emva koko i-TV ingena kwimowudi yokulinda, faka ikhasethi yevidiyo uze ucinezele Dlala.
• Iiplagi ezaphukileyo. Ngethuba lokusebenza kwexesha elide lokurekhoda kwetape, amachweba ahluleka, ngoko ke, xa iplagi ifakwe, isibonakaliso asifiki. Kule meko, i-hardware kufuneka ilungiswe.
• ingqibelelo yocingo. Ngokuqhelekileyo, “ukuphuka” kwentambo kwenzeka kwi-bend, ngoko kufuneka uqiniseke ukuba intambo ayigobi xa idibanisa. Oku kungasebenzi kakuhle kunokukhokelela ekuweni kombane kunye nomonakalo kwisixhobo.

Ungazami ukwenza ukulungiswa ngokwakho, kungcono ukuqhagamshelana nenkonzo, apho baya kuqhuba ukulungiswa komgangatho ophezulu okanye ukutshintshwa kwamacandelo, ngelixa inkosi iya kuxilonga isixhobo.

Umaleko wesandi ovela kumajelo eTV

Ukuba akukho ngxaki ngokuhanjiswa kwevidiyo, kwaye isandi asidlalwanga kuphela kwi-VCR, kodwa nakwindlela efanayo ukusuka kumajelo e-TV, ingxaki ikunxibelelwano lwe-antenna, oko kukuthi kwindawo yayo. Umdlali usasaza ngamaza aphantsi, kunye ne-eriyali esebenzayo kumaza aphezulu, ngoko ke iwisa isiginali. Guqula indawo ye-antenna ngokujikeleza okanye ukuhamba, kwaye ngokukhawuleza ukuba isignali yamajelo osasazo ilahlekile, qalisa ngokutsha izixhobo. Emva koko vula i-TV kuphela kwaye ulungelelanise isandi ngokuhambelana nokuphindaphinda kwamajelo osasazo. Oku kuyimfuneko ukwenzela ukuba ukwamkelwa komqondiso kwenzeke ngokwahlukileyo kwiTV.

Iingcebiso

Ngaphambi kokuqala uxhumano, kungcono ukufunda imiyalelo eqhotyoshelweyo kwisixhobo ngasinye (ukuba kukho), oku kuya kukunceda uqonde umgaqo wezenzo ezilandelayo. Kwakhona kungcono ukunamathela kule migaqo kunye neengcebiso ezilandelayo:

• khangela ukusetyenzwa kwesixhobo ngasinye, ngaphandle koko uxhulumaniso luya kuba lungenanto, okanye lube yingozi;
• lungisa iingcingo eziyimfuneko kunye ne-adapters – ukuba ngexesha lomsebenzi kuvela ukuba intambo ayifanelekanga okanye iphosakele, ukutshintshwa kuya kuthatha ixesha elide;
• qaphela amanyathelo okhuseleko – awukwazi ukudibanisa ikhebula kwisixhobo esitshintshiweyo, oku kunokukhokelela ekuqhekekeni okanye kwisiphaluka esifutshane;
• kwi-VCR, hlambulula intloko yamagnetic – ukuba awukwazi ukwenza oku, qhagamshelana neziko lenkonzo, apho iingcali ziya kuxilonga kwaye zihlambuluke;
• emva koqhagamshelo ngalunye, qalisa kwakhona izixhobo, oku kuya kunceda ukugcina izicwangciso zokuxhuma;
• ukuba ngexesha lokudlala kwevidiyo uva “ukubetha” ngaphakathi kwesixhobo, kufuneka uqhagamshelane nenkosi, intloko inokomisa;
• zama ukugoba iingcingo, njengoko oku kunokukhokelela “ekuphulweni” ngokukhawuleza kwe-microwires.

Ngoku uyayazi indlela yokudibanisa iVCR yakho kwiTV yakho kwaye ubukele iividiyo zakho ozithandayo zekhasethi. Inkqubo yoqhagamshelo ilula kakhulu, eyona nto iphambili kukuyiphatha ngononophelo olufanelekileyo. Kwimeko yeengxaki, kuyacetyiswa ukuba uqhagamshelane neevenkile ezikhethekileyo apho uya kuncedwa.