How to set up a smart watch: time, date, calls, pedometer and other basic functions

We bought a smart watch, then the question arises, how to set the time and date, pedometer, calls, music, how to set your dial on a smart watch with an android phone, iPhone: complete instructions. Modern technologies penetrate into different spheres of people’s lives. Today, smart watches are used, for example, not only during sports activities or training, but also in everyday use. They have completely replaced the standard wristwatch, so many users, especially beginners, often have questions regarding the connection and subsequent configuration of this accessory. It must be remembered that models are produced for different operating systems, so it is important to take into account the differences in actions when synchronizing and setting up a smart watch.

The first connection and setup of smart watch: what to look for

If a full-fledged high-quality smart watch is purchased, then it is usually not difficult to set it up, but the question of how to connect and set up arises for almost all inexperienced users. An important step when you turn on your watch for the first time is to properly connect to your smartphone. It is for this reason that it is recommended to immediately turn on wireless communication (bluetooth) on the phone, as well as place the smart device next to the smartphone. Another recommendation is to ensure that the charge level of all devices is full, or at least 70%.

It is important to connect and perform all settings through a special application installed on your smartphone. You can download it by the cuar code on the box or the instructions for the watch, or online by the name of your smartwatch model.

Setting up a smart watch begins with the fact that you need to set the correct time. It is not difficult to do this, just follow the virtual prompts. They will appear directly on the display or on the smartphone screen. Sometimes you need to reset the time. It is needed, for example, if the clock has already been turned on, in the event that the factory settings have been reset, if the previously set time has failed. Also in the settings you need to immediately set the date, the required options, for example, the number of steps taken, the load during training (pulse during exercise).

Initial setup of a smart watch with a smartphone running Android

The first connection and configuration takes place automatically at the time of synchronization with a smartphone through the application. If problems arise, then the question is how to set up a smart watch with a phone that runs on Android, then this can be done, including manually. All actions are performed through the settings menu, directly in the watch itself. Also, the setting is carried out using a paired application with which the purchased device works. In some cases, the manufacturer allows the connection and subsequent configuration process with the help of a special command that will be sent to the device in a short message or with the help of a cellular network operator with the support of a SIM card clock. To connect and configure you will need:

• Go to watch settings. For this purpose, you need to pull the screen from top to bottom (a special curtain will open).
• Then you should go to the “Settings” item.
• Then go to “System”, where you should select the “Date and time” tab.

Then the user gets the opportunity to set the time, which will be synchronized with the smartphone constantly in automatic mode. Further settings are also carried out via the menu. To do this, you need to use a smartphone connected to the Internet. In it, you need to select the tab in the “Network Date and Time” settings, then set the time zone (in the “Network Time Zone” tab). In order to set the time on the smart watch manually, you need to set both parameters for the network to an inactive state and then set the date, time or time zone. To change the time format in hours, you must first go to the settings, then go to “System” – Date and time. There, find the line 24-hour format and set the switch to the “On” position (should turn green).

Synchronization, connection and configuration of smart watches on iPhone

In the event that the question arises of how to set the date, time and other settings and applications on a smart watch paired with an iPhone, then there should be no difficulties either. You can manually move the time, for example, a certain number of minutes ahead. In order to make settings and settings on iWatch when connected to an iPhone, you need to do the following:

• Check the charge level of the devices (not lower than 70%, better completely).
• Connect your smartphone to the Internet (mobile or wireless).
• Directly on the phone you will need to go to the settings.
• Then select “Basic” from the list.

After that, you can set the parameters, for example, specify the date and time. After a message appears stating that the data has been updated, you will need to restart the device. This is required to receive the update.

The Apple Watch or other smartwatch should also be restarted for everything to work without errors. In the event that there was no message, it is recommended to go to the settings menu to repeat the procedure.

Initial setting of the smart watch: date, time, location [/ caption] After that, you will need to wait a few minutes and re-configure the parameters. To set the time zone on your phone, you need to go to Settings – General – Date and time. Then you need to turn off the “Automatic” option. In the next step, you will need to select the necessary belt for its installation. Then the smart watch is paired with the iPhone. If all the steps are performed correctly, then all the parameters set on the smartphone will then be downloaded to the watch. This will happen automatically. You can also make the initial settings manually directly in the watch. For this purpose, you need to go to the “Settings” menu. Then you will need to scroll through the time parameters to the desired values, you can also set the current date and time zone in hours. After selecting the values, it remains only to confirm by pressing, for example, the “OK” or “Select” button. It should be taken into account that the time setting and adjustment made does not affect the actual time that will be displayed in the smart watch. On the screen, the user will see the set value, but all events will take place taking into account the time of the network and the smartphone. Similar settings are made when you need to set the weather, language.

How to set up a connection after disconnection

If there is a disconnection, you will need to reconnect the smart watch to the phone. To do this, you will need to connect a wireless connection to provide Internet access. After doing synchronization.

Setting up a smart watch with a new phone

Important! When connecting a new smartphone to a smart watch, it is best to reset the watch to factory settings. So in the future there will be no errors during synchronization and during the operation of the device.

In order to set up a smart watch on a new phone, you will need to perform the following steps:

• Turn on Wi-Fi or Bluetooth on your watch and smartphone.
• Turn on the device itself. Here you need to take into account one feature – it should be on the hand where you plan to wear it all the time.
• Then you need to wait until the company logo or the name of the watch brand appears on the screen.
• Then you need to put your smartphone and watch side by side.

The next step is to confirm the pairing. After that, you need to bring the dial to the camera of the smartphone. After a few minutes, the devices will sync. This will happen automatically. Then, through the identifier, after a request appears or in the settings in the “Basic” item, data may be required. After that, you can directly adjust the clock. In most cases, tips will appear on the smartphone screen. They must be followed to avoid errors and inaccuracies.
Sometimes it can happen that the software is out of date. In this case, when you connect your smart watch to your smartphone, you will be prompted to update. The process must be performed for the correct operation of the devices.

It must be remembered that it is possible to connect an Android smartphone and an Apple Watch. BUT! The clock in this case will work with limited functionality. They will allow you to use the timer, alarm clock and find out the weather forecast. Of the additional features, only sleep control will be available.

Notification settings

If the question arises, how to set up notifications on smart watches , then to solve the problem you will need:

• Charge and turn on the watch.
• Turn on the smartphone (it must also be charged).
• Install the official app from the smart watch manufacturer. For example, if a Xiaomi device is purchased, then the Mi Fit program is required.

After that, you need to activate the program. To do this, go to the settings, and then to the binding menu and complete the process, following the prompts.

Call settings

Often the question arises of how to properly set up calls. In this case, you must first open the settings on your smartphone and connect the Bluetooth wireless connection. After that, you need to find the necessary hours in the list of devices available for connection. Then find a suitable menu item, for example, “Watch Call”. Only the name of the smart watch can be specified. After that, you need to click on this line and connect calls on the watch inside the application. How to set up a smart watch: connection, synchronization and settings, how to display the clock, calendar, set up a heart rate monitor and other applications: https://youtu.be/w7wOvUtGn_c

Weather setting

What do I need to do to display the weather forecast on my device? It’s also easy to make settings. You need to select the appropriate one from the list of available functions. For example, it may be called “Weather”. You will need to click on it so that the watch and smartphone are synchronized at the place where the forecast is displayed.

Setting up third-party applications

All basic settings related to applications are carried out in the official program. It must be downloaded from the store or from the official website of the manufacturer. After installation, you will need to enter the program and select the applications available or required by the user from the list.

Setting other functions that may be on the watch

After setting the time, date and weather, calls and messages, you can move on to other functions of the smart watch. Physical activity control is configured in the application. The watch will be able to count steps, check the pulse and pressure, track sleep. All available functions are listed in the watch menu. You will need to click on the desired ones to enter the required parameters.
Setting the time on a smart smart watch [/ caption] Music control is also done using the clock. After setting up, you can scroll through the songs, change the volume, create your own playlists and add songs to them. For example, such collections are required for training or jogging. The watch can be equipped with location sensors. In this case, you need to ensure that the watch and smartphone are constantly paired. This is how it is configured, for example, to display the location through the application on the smartphone:

Setting up popular models

Many smart watches have a similar menu. Only the nuances differ. To start working with any model, you must first pair the device with a smartphone. Then install the program by the name of the clock. After that, all settings are carried out in it. In the menu, you need to select those parameters that will be important to the user. For example, you can connect messages from a messenger, calls, a calorie counter, and other parameters. If there are, for example, the recently popular Honor Band 3, then pairing with a smartphone is also required first.
It is produced using an application called “Health” from Huawei or the official Huawei Wear program. The manufacturer recommends using “Health”. This program is not inferior in functionality to the Wear application, but the advantage is that it displays more relevant information. It is advisable to register an account. In this case, you can get the possibility of cloud storage. A similar course of action must be carried out in order to set up smart band clocks 7 or 4-6 versions. All additional functions are connected and configured using a special application.

Possible problems and solutions

Most often, problems arise that are associated with the fact that paired devices stop seeing each other. To solve this problem, it is recommended to reconnect the Bluetooth wireless connection. The settings may also fly off or not be set. In this case, you need to update the application.

Setting up a smart watch without a phone

In this case, the functionality and capabilities will be limited. Smart watches without synchronization with a smartphone can track the main activity. You can measure your heart rate, count the distance traveled, steps and calories burned, start and stop the workout mode. Additional features are represented by a stopwatch, a timer, the ability to turn off the sound. All settings are made directly in the watch menu.