How to connect a home theater to a TV – step by step instructions

In order to figure out how to connect a home theater to a TV, it is important to know what ports these devices are equipped with. To watch video content on the big screen, enjoying 5.1 multi-channel sound, you need to connect all the wires according to a certain scheme.

What you need to connect a home theater to a TV – a kit, an example on real components

A home theater consists of several components – a receiver, a speaker system and a DVD player. The manufacturer’s instructions usually indicate the connection diagram. It is recommended to disconnect the devices from the power supply before connecting the home theater. In this case, the plugs must be removed from the socket. The main component is the receiver to which media playback devices are connected. Connecting your home theater to your TV begins with looking at the back of your TV for the necessary outputs.
Insert the appropriate connectors into the OUT ports. Then you should find the inputs marked IN on the back of the receiver. There it is necessary to connect the wires from the other ends. The next step is to select the signal broadcast source on the TV using the remote control and configure the parameters of the output image and audio.

How to connect a home theater to a TV via AUX, HDMI, coaxial cable, optics, Wi-Fi, tulips

Through the HDMI interface, you can send high-definition audio and video to your TV. The component connector also allows you to broadcast the image and sound in excellent quality. It consists of three multi-colored plugs.

A coaxial cable should be used if it is not possible to connect to an HDMI and RGB port. The SCART connector on new home theater models is rare, as is RCA.

Once connected, the home theater media players will start sending sound and picture to the receiver. In this case, the equipment is not yet recommended to be included in the network. Next, you need to send the audio signal to the speakers of the acoustic system by connecting the speakers to the corresponding connectors on the back of the receiver.

How to connect a VGA monitor to a home theater system: it depends on the equipment of the media center with the necessary ports. If there is no such slot, you need to choose a cable, at the other end of which there are “tulips”. https://cxcvb.com/texnika/domashnij-kinoteatr/kak-vybrat-kabeli-i-provoda.html

Setting

To transmit an audio signal through the speaker system, you must activate the item in the settings menu of the TV receiver, which is responsible for playing the audio signal from an external device.

This section may be referred to as playing audio for acoustic system.

You need to uncheck the box for playing sound through standard speakers. If you are using a speaker system, it is recommended that you change the basic settings to select the appropriate sound modes. Next, you should do manual adjustment of the image displayed on the display. To do this, it is recommended to disable the automatic default settings. To achieve the highest quality picture, it is important to adjust the brightness, contrast, color correction, scaling and clarity. If the borders are set incorrectly, a cropped image will result. This can be changed by going to the Overscan section. To prevent the picture from merging in dark areas, it is recommended to adjust the brightness. The same goes for adjusting the contrast so that all objects become visible. It is desirable to set the color palette in the middle of the scale, to get natural. How to output sound from a TV to a home theater / AV receiver – video connection instructions:
https://youtu.be/_fK0KTaHH90

Possible problems and solutions

Connecting home theater speakers yourself is sometimes accompanied by some difficulties. To avoid errors in signal transmission, it is important to familiarize yourself with the scheme proposed by the manufacturer and follow the specified sequence.

It usually includes a receiver, a media player and an audio system. The connection diagram can be found in the user manual or you can figure out the sequence of connecting cables yourself. Modern TV sets necessarily contain one or more HDMI ports. Older TVs are equipped with component connectors, as well as slots for connecting via S-Video and SCART.
After selecting the HDMI format, insert both ends of the connectors into the sockets marked IN and OUT respectively. When connecting video, “Input” is responsible for connecting a TV, “Output” – for a receiver. If you plan to connect a subwoofer, the speaker layout and color coding must be observed. It will not be possible to connect the center speaker to the side speaker and vice versa. Fiber optic cable is less convenient for connecting a TV to a home theater compared to HDMI, since it uses video and audio separately.

How to Connect a Sony Home Theater to a Sony TV

When answering the question of how to connect a Sony home theater to a TV, you need to choose between HDMI and coaxial cable. But first you need to find out what format the TV device supports. Older CRT models used a SCART slot. Devices from the same manufacturer have excellent compatibility.
SCART slot. [/ caption] Having connected the equipment with a cable, you can start setting up. To do this, the option “Control for HDMI” is provided. If you use a coaxial cable connection, you must plug the ends of the cable into the appropriate jacks on the receiver and TV. After that, the TV can be plugged into the mains and go to the sound settings by selecting the “Fixed” or “Variable” function. Next, turn on the home theater and select the desired source for media playback.

Connecting to an old TV

If the question arose of how to connect a home theater to an old TV, then first of all, compatible connection interfaces will need to be found on the devices. Older televisions are equipped with analog RCA format and SCART sockets. The last method of video transmission is characterized by low resolution. On the receiver, the OUT mark is used for connection, on the TV – IN. To connect external speakers to the TV, you will have to use a red and white RCA plug, designed for audio broadcasting.
After the connectors have been inserted into the correct slots, you can turn on the TV. Then use the remote control to select the desired playback source. The Source button is responsible for this. https://cxcvb.com/texnika/domashnij-kinoteatr/kakoj-vybrat.html

How to connect a new TV to an old home theater?

All you have to do is connect the output connectors of the source and receiver of the signal to prepare your home theater for viewing. If there is no HDMI connector on the home theater, you will have to use “tulips”, an optical or coaxial cable.
Fiber optic wire can be used to transmit multi-channel audio. This option is suitable for connecting external speakers. One end of the cable is inserted into the TV port, and the other end into the receiver. After that, the acoustic system will automatically detect the connection to the optical connector. By selecting the coaxial wire, you can also set up multi-channel audio. However, sometimes there is interference in signal transmission. The connector on the connector must be screwed. How to quickly connect an old home theater to a new TV – video instruction: https://youtu.be/63wq15k3bZo If the home theater system was made a long time ago, then such a device may not have other connection interfaces other than “tulips”. This will ensure the devices are backward compatible. In this case, you need to connect the analog ports on the TV and the receiver, following color markings. https://cxcvb.com/texnika/domashnij-kinoteatr/kak-sobrat-ustanovit-i-nastroit.html The outdated SCART format allows you to get satisfactory stereo sound and image quality. This method is applicable if it is necessary to connect old devices together.