How to distribute the Internet from your phone to TVs of different brands

To connect the TV to the Internet, wired communication and Wi-Fi are not always used. An ordinary phone can also act as an access point. It is only important to know how to properly distribute the Internet from it.

How to share internet from android phone to tv

Modern TVs can be used for more than just watching movies and TV shows. If they have the ability to connect to wireless networks, and most modern devices have it, the TV can be used as a computer or
game console . However, it needs a stable internet connection to do this. If for one reason or another it is not possible to connect the TV to wired or wireless networks in the room, you can use your phone or tablet as an access point.
Devices based on the Android OS have the ability to distribute the Internet. Both computers and laptops, as well as TVs, can connect to them. For this you need:

1. Connect your phone to a mobile network with the possibility of distributing the Internet. At most operators’ tariffs, a per-megabyte payment is charged for the distribution of the Internet. On the day, the subscriber is given the opportunity to distribute only a certain amount of Internet. This should be taken into account when the subscriber begins to use his phone as an Internet access point for the TV.
2. Disable the Wi-Fi reception function. You can do this in the corresponding section of the phone settings.
3. Go to advanced network settings.
4. Click on the “Modem Mode” item.
5. Activate the “Access Point” function. This is done by moving the slider in the relevant section.
6. If desired, you can change the value of the “Keep hotspot” item. By default, this is set to “Always On”. If the subscriber changes it to “5 minutes”, then 5 minutes after disconnecting the TV from the phone, the access point will automatically turn off. This saves battery life.
7. You can set the type of data encryption. This is either WPA2 PSK or WEP. The first is speed and reliability. The second one is more suitable for older devices.
8. To prevent outsiders from using the access point, it is recommended to set a password. You can do this in the appropriate settings section.
9. To prevent the settings from being lost, you need to click on the “Save” button.

On some phones, it is possible to use not a mobile connection, but a signal from a router as an Internet source. In this case, the device will act as a Wi-Fi repeater. However, this scheme is considered complex and not safe.

We should not forget that when Wi-Fi is activated on Android, the battery consumption level and the load on the processor increase. The result can be a quick heating of the phone and the need to replace the battery.

How to distribute Internet from iPhone to TVs of different brands via wi-fi

iOS devices can also be used as a means of connecting the TV to the Internet. You can set up an access point in the Cellular section. Next, you need to go to the “Cellular data” item. To activate the function, you need to drag the slider, which is located opposite the title. Then, as on Android, you will need to enable “Tethering Mode”. To do this, the following steps are performed:

1. In the menu of available settings, the section “Modem mode” opens.
2. The user goes to the “Password” section, where he enters a certain combination of letters and numbers to protect his phone from the possibility of connecting other devices.
3. After entering the password, click the “Finish” button. Otherwise, the data will not be saved.
4. In modem mode, data transfer is activated.
5. The person navigates to the “Turn on Wi-Fi and Bluetooth” section.
6. Bluetooth signal transmission is disabled. This reduces battery consumption and keeps your phone charged longer.

After that, it remains only to connect the TV to a new access point. Once the connection is established, your phone will display a notification that a new device has been connected to it. There will also be permanent information on the number of TVs, PCs, etc. that use the phone as an Internet access point. How to enable tethering on Iphone: https://youtu.be/g1K0bNyO45Y

How to distribute the Internet from your phone to different brands of TV of different years of release

In the standard version, the TV connects to the Internet through the “Wireless networks” section of the device settings. However, depending on the specific brand of equipment, there may be various nuances associated with this process. How to distribute the Internet from your phone to a TV of Samsung Smart TV models of the M series and newer:

1. On the TV, you will need to open the Smart TV settings menu. This can be done by pressing the Home key on the remote control (it shows a stylized house). A menu will appear on the screen. In it you need to select the “settings” section.
2. Next, the selection moves to the “General” item.
3. In the window that opens, select “Network”.
4. The user opens “Network Settings”.
5. Because the phone is a wireless Internet access point, the person is required to select the “wireless” option.
6. A list of networks that the TV can potentially connect to appears on the screen. The selection is transferred to the network created on the mobile device. Because most likely it will have the strongest signal available, then its designation will be in one of the top lines.
7. The password previously created on the gadget is entered on the keyboard. If a person doubts the correctness of the input, you can check the box “Show”. Then the entered characters will be displayed not as dots, but as letters and numbers.
8. At the bottom of the window is the word “Done”. By clicking on it, the user will complete the operation.

How to distribute the Internet from a phone to a Samsung TV series K and below (i.e. released earlier than 2016):

1. First of all, you need to tap on the “Menu” key, which is located on the remote control.
2. A window appears in front of the user. Here the “Network” section is selected.
3. The network settings open. They are placed in the appropriate section.
4. The Network Type window appears on the screen. There are only two items here: “Wireless” and “Cable”. You have to choose the first one.
5. A list of networks for possible connection appears. The one that was previously created on the mobile is selected.
6. A virtual keyboard appears at the bottom of the screen. By clicking on the corresponding characters with the cursor, the person enters the password.
7. After writing it, the “Done” key is pressed.

How to share Internet from phone to LG TV:

1. To connect to a mobile hotspot on an LG TV, you need to open the TV’s basic settings menu.
2. The cursor is placed on the “Network” item.
3. The section “Connect to a Wi-Fi network” is selected.
4. In the list that opens, you will need to find the name of the mobile hotspot previously created on the phone.
5. Using the keys on the remote, the person enters the password.
6. Connection to the network occurs automatically and does not require additional actions from the user.

How to share internet from phone to philips tv

1. On the remote key you need to find “Settings”.
2. By pressing it, a person opens a list of available options on the TV screen. Here you need to select the “All settings” section.
3. In the window that opens, select the “Wireless networks” subsection.
4. On the right side of the panel there is a section, in the abbreviation of which there is the designation “Wi-Fi”. Having opened it, a person presses the “Connect” button.
5. The system will prompt you to select a connection option. To interact with the mobile network, the “Wireless” option is selected. In the English interface, it is designated as “Wireless”.
6. A window opens with a list of devices whose signal the TV can catch. The appropriate network is selected here.
7. The system will ask for a password. It is typed using the remote keypad. After that, the device will connect to the mobile hotspot.

How to share Internet from phone to TV and connect to wi-fi Smart TV on Android and other operating systems: https://youtu.be/K5MS4GP_xTs

Necessary conditions for Internet distribution to work

On most modern TVs, the ability to connect to wireless networks is a built-in feature. However, in order for the subscriber to be able to use the mobile Internet through TV, the latter must have a built-in wireless module. If it is missing (which happens on a number of models), in order to connect to Wi-Fi, it must support external USB Wi-Fi adapters.
Wi fi adapter [/ caption] If this option is also missing, the TV must have an Enternet connector through which you can connect a LAN adapter or router in Wi-Fi receiver mode. When distributing a phone, a stable connection to the mobile network and a high signal level are required. Data transfer will be immediately terminated if the package of available Gigabytes has ended on the tariff plan.

Common Problems

TV cannot access internet after connection is established. Perhaps the mobile operator is blocking the distribution of the Internet to third-party devices or the data transfer limit has been exhausted on the tariff. This can be found out by going to the personal account of the mobile provider and familiarizing yourself with the conditions of your tariff in detail.
The image when watching movies “slows down”. Most likely the reason is the low speed of the Internet. Perhaps the signal level is insufficient to transmit a large amount of information that is required when downloading video files. As a solution to the problem, you can try moving the phone to another place where the connection catches better.
The TV shows that the
Wi –
Fi signal is very weak.There may be some obstacle between the phone and the TV that is preventing the signal from propagating. Such problems can arise even due to interior walls of medium thickness. To increase the signal strength, you can try placing the devices in close proximity to each other. If for some reason it is not possible to connect the TV to the fixed Internet, the phone can easily become an access point. This practice is used frequently. The only thing is that before that it is better to familiarize yourself with the conditions of your tariff plan in detail, so as not to inadvertently go into the red.