Samsung TV Remote Disassembly Instructions

Disassembly of the remote control may be required to clean the contacts and microcircuit from accumulated dust and dirt inside the device. You can do it yourself. The main thing is to know the location of removable parts and fasteners.

Features of disassembling the remote control from the Samsung TV

There is no particular difference in the design of the remote controls, they may differ in overall dimensions and the location of the buttons. Consider only the general principle of disassembly. Unplug the device yourself only to clean the buttons from dirt. If the remote control malfunction is a broken chip or other part, contact a specialist who has the necessary equipment for repair with this issue. This will keep the remote working.

What tools will be needed?

To disassemble the console, you will need simple tools that everyone has, but do not forget that the work is carried out only for the purpose of cleaning the device. Main tools:

• Phillips and flat screwdrivers;
• knife.

After preparing the necessary tools, free the table from unnecessary items and prepare a small container for collecting screws.

Samsung TV Remote Disassembly Instructions

Before starting work, inspect the device and study the location of the mounts. Basically they are in the battery compartment. Carry out disassembly in stages, it is advisable to place the removed parts in the order in which they were removed. Step-by-step instruction:

1. Flip the remote down with the buttons and slide the back panel towards the indicator light. A gap will appear on the front base. Grab the body part and pull in the desired direction. The battery compartment will open. Pull out the charging elements, which will give access to the fasteners. Loosen the screws with a Phillips screwdriver.
2. The remaining parts of the remote control can be held on with plastic latches or be glued. There are 2 openings on the right side. If the developer does not provide for the use of special glue, carefully swipe along the borders with a flat screwdriver, thereby prying the case. There is a separation of the seams through the area of ​​the terminal.
3. After completely removing the cover, access to the rubber buttons opens. Disconnect the board, but do not disconnect the sensor from it.
4. Remove the board, which is located next to the battery compartment, with a knife, carefully prying it up on both sides.
5. Remove the infrared LED from the socket without breaking the contact.
6. Wipe the track area of ​​the chip and the keyboard with alcohol. This will clean the contacts of dirt and prevent sticking.
7. After cleaning the remote control and its elements, assemble in the reverse order.

If the body of the device was glued with glue, the latter will be needed again to completely fix the removable parts.

Do not use liquids with a low percentage of alcohol or water. This can harm the chip and the device in general.

Possible malfunctions and ways to eliminate them

If the TV does not see the remote control, check the connection and determine which of the two devices is broken. For this:

1. Connect the equipment to the mains. The problem could be a wire or an outlet.
2. If the TV does not work, start it from the key located on the body of the equipment itself. If it does not work, contact the master, because the malfunction may be in the TV itself.
3. If the TV turned on from the main button, and nothing happens when the remote control is pressed, then the problem is specifically in the remote control device.

The main breakdowns of the television remote control are:

• Mechanical failure. Often they happen in families with children who can accidentally drop or hit the device, fill it with water, etc. In this case, a complete replacement of the remote control is required, because the chip often breaks when hit. Put the new remote control out of the reach of children.
• Batteries. All remote controls are battery operated. Before disassembling the device, check the charge. To do this, purchase new batteries and check the remote control. If there is a signal, then the problem was caused by dead batteries.
• Chip. Damage cannot be repaired. A common malfunction is a loose contact or some more serious problem.
• Buttons. The malfunction appears when the remote control has been used for a long time. The gasket between the contacts of the microcircuit and the buttons is gradually erased, which does not give a normal signal.
• LED lamp. If replacing the batteries does not help, then the problem lies in the electronics. You can replace the lamp yourself, having the necessary equipment, but it is better to contact a specialist.
• Quartz resonator. Breakage is formed in case of falling of the device. It is better to buy a new remote control.

If you find any (even minor) malfunctions in the operation of the device, it is advisable to pay attention to this immediately. So it’s easier to eliminate them.

Connection and subtleties of setting up the remote control

There should be no problems with connecting and configuring the TV remote control. If there are difficulties, you can use the instruction manual. There are 2 types of devices:

• Button. It can be used immediately after installing the batteries. It has no special settings, this view is universal. You only need to know the name of the keys and what function they perform.
• Sensory. It has a more complex signal transmission process. Initially insert batteries and press power. Then use the “Return” and “Guide” buttons. Hold for a couple of seconds until the “Bluetooth” icon appears. This indicates that the remote “found” the TV.

If the LED on the remote control flashes continuously, pay attention to the incorrect setting. To fix the problem, turn off the TV and turn it on again after a few minutes, then perform the settings again.

When purchasing a remote control device, make sure it is compatible with your TV. To do this, open the battery cover and look at the special number.

Helpful Hints

There are several preventive measures and useful tips to help extend the life of the remote control:

• To clean the device, you will need an alcohol-based solution and paper towels. To clean hard-to-reach places, use ear sticks or a match wrapped with cotton wool.
• To facilitate reassembly, lay out the parts in sequential order.
• Keep the device away from water and food.
• In order not to look for the remote control throughout the apartment, decide on its permanent storage location.
• If there are “antennae” contacts in the battery compartment, insert the charge very carefully so as not to bend or break the contact.
• Sometimes some devices (microwave, router, etc.) affect the operation of the remote control. They emit radio waves that can demagnetize a battery. Do not leave the device near this equipment.
• To keep the contacts clean, wrap the remote in plastic wrap.

To prolong the life of your device, follow these simple rules of use and storage. So you will save the remote control from pollution and negative mechanical factors.
A malfunction of the remote control device is a common occurrence. Sometimes the problem may be minor, and this is not a reason to replace the remote. Using the necessary tools and operating tips, you will avoid more serious damage and further repair of the remote control.