What kind of program is this Satellite Antenna Alignment, how and where to download SAA, configure – instructions in Russian. When
installing a satellite dishdirection is important. It must exactly match the location of the satellite that is broadcasting. If the deviation is even one or two degrees, the quality of the received signal will deteriorate dramatically. This program is free for personal non-commercial use. It uses location data for most of the satellites that are used for television broadcasting. By selecting the desired one, you can get the exact data for tuning. There is also a small database in which previously entered values are stored. This eliminates the need to re-enter them. It is possible to set the visibility of the selected satellite, determine its azimuth and angle above the horizon. Using the program, you can accurately direct the antenna to it, ensuring high quality reception.
Why you need the Satellite Antenna Alignment program, interface
The use of a satellite dish allows you to receive a high-quality television signal. To use this, you must follow a few rules. It is necessary to point the antenna very precisely at the desired satellite. In this case, you need to know its location. The antenna must be positioned in such a way that nothing obscures it. To do this, it is usually placed on the outer wall of the house or on the roof. This is easier to do when installing in a private house and sometimes more difficult in an apartment building. An outdoor antenna is exposed to wind and weather. This can cause it to shift and allow moisture or debris to enter. To maintain performance, it must be regularly inspected, adjusted and cleaned if necessary. The Satellite Antenna Alignment program stores data on a large number of television satellites, allowing you to select the one which the user needs. After that, he receives all the data necessary for fine-tuning the antenna. In particular, the app provides azimuth and elevation.
Application interface
In the above image, on the left side there is a table where you can select the desired satellite. On the right half of the screen, all the necessary data is provided. It is important to note that you can use the application without using a compass. In this case, it is possible to determine the location of the signal source in relation to the sun. https://cxcvb.com/texnologii/sputnikovoe-tv/ustanovka-i-nastrojka-sputnikovoj-antenny.html
How to download and how to use SAA in practice
You can download the program for Windows, for example, at https://satellite-antenna-alignment.ru.uptodown.com/windows. After installation and installation, you need to run it. After that, the user will see the main screen of the application. For Android in Russian, you can download the application at the link https://play.google.com/store/apps/details?id=zekitez.com.satellitedirector&hl=ru&gl=US The program stores a database that includes information about most broadcast satellites. To set up, just know the rise (Elevation), and azimuth (Azimuth).
In the first case, the angle to the horizontal plane is considered. For example, a straight up direction would correspond to an Elevation of +90 degrees, and a straight down direction would mean -90 degrees. Azimuth is the angle that is plotted in the horizontal plane. It is counted from the direction to the north, making a turn clockwise. The following values can be given as examples: to the East – corresponds to 90, to the south – 180, to the west – 270 degrees.
Using these two coordinates, you can accurately and unambiguously determine the position of a celestial body. For example, it could be the Sun or a broadcasting satellite. To start the calculation, you must enter certain data. These include the width and height of the antenna to be tuned, and the latitude and longitude of the installation site. When entering latitude, you must specify degrees, minutes, and seconds, and also indicate whether we are talking about the northern or southern part of the ball. East or West longitude is entered in the same way. After that, in the table on the right, select a row that contains information about the desired satellite. For information about which one is used, you need to ask the broadcast provider or look at his website. The disadvantage of the program is that the data is presented here without taking into account the transition to daylight saving time. This circumstance must be taken into account when entering information. Among the input data, there is a need to specify the time zone used.
Tuning can be done without using a compass. The program knows not only how the various satellites are located, but it can also indicate the exact location of the sun at the right time.
This, for example, can be used as follows. By obtaining data on the desired satellite, you can find out when the sun will be close to the broadcast satellite. You can find out the desired azimuth and the exact time when this happens. At this point, the user can carry out the setup procedure.
The position of the sun is displayed as a simple pie chart. It looks like this. Pie chart to display the position of the sun:
On the right side of the screen there is a circle, a significant part of which is yellow. It corresponds to the position of the sun during daylight hours. The chart is oriented so that east is on the right, south is at the bottom, and west is on the right. The edge of the yellow sector on the east side corresponds to sunrise, and the one on the west side corresponds to sunset. The red beam corresponds to the current position of the star. Sometimes it is not visible. This means that the satellite is not visible at the specified time. Above the diagram, the values of the corresponding angles are exactly indicated. The lower part shows the azimuth and elevation angle for the selected satellite. To switch between screens, as well as to export calculated data to various formats, there are corresponding hot keys. The program is regularly updated, adding new data to its database. The list of required information can also be additionally downloaded, for example, from satcodx.com. The calculation made can be saved in a text file or, for example, in the form of a spreadsheet. At the same time, you need to remember that the application makes the calculation without taking into account various additional circumstances. At the same time, it must be remembered that the following circumstances can affect the position of the satellite dish: the directivity of the transponders, the presence of obstacles in the area, the height above sea level, and some other circumstances. The program has an interface in various languages, including Russian. that the position of the satellite dish may be affected by the following circumstances: the directionality of the transponders, the presence of obstacles in the area, the height above sea level, and some other circumstances. The program has an interface in various languages, including Russian. that the position of the satellite dish may be affected by the following circumstances: the directionality of the transponders, the presence of obstacles in the area, the height above sea level, and some other circumstances. The program has an interface in various languages, including Russian.
Possible errors and problems – their solution
When installing the antenna, it is important to securely fix its position. It must be taken into account that the device located outside is exposed to the weather and can be displaced. Even a small shift can lead to a significant reduction in signal quality. It is important to use reliable fasteners during installation, which will ensure the immobility of the antenna for many years. During installation, attention must be paid to the quality of the connecting cable used. It is necessary to avoid sharp bends when laying it, as well as to ensure its reliable connection to the connectors. To get the correct results from the program, you must enter verified data. If you make mistakes, then the azimuth and elevation given by the application will differ from those that are needed. Before connecting, you need to know exactly what broadcasting satellite is needed. This information can be obtained by calling the provider or by reading the relevant information on their website. https://cxcvb.com/texnologii/sputnikovoe-tv/sputniki-s-besplatnymi-kanalami-2022.html When installing, it is necessary that the antenna is precisely oriented to the signal source. Its installation must be done with the utmost care. Some people think that it is enough to direct the antenna in the same way as the neighbors do. In fact, this method is inefficient, since it does not allow achieving the desired accuracy. https://cxcvb.com/texnologii/sputnikovoe-tv/programmy-dlya-nastrojki-antenn.html Sometimes it may happen that by directing the antenna in the right way, the user sees that there is an obstacle for reception, for example, in the form of a tree or a building . In this case, it will not be possible to immediately achieve a good quality of the received signal. In the situation under consideration, it is necessary to find a place where the satellite will not be obscured. If the connection cable is longer, consider using a received signal amplifier to prevent signal attenuation.
