Overview of the DVR Vehicle Blackbox DVR – reviews, instructions in Russian, installation

General overview of the Vehicle Blackbox DVR, instructions in Russian, reviews of real buyers, how to properly install the mirror recorder in the car. The Vehicle Blackbox DVR is a compact on-board computer for a Chinese-made car. It is a system of two cameras that allows you to capture the view of the front and rear of the car.
The front camera is mounted on top of the rear view mirror. When the display is on, the DVR works like a mini-computer or tablet, with a limited set of functions. You can display the view from both cameras on the screen and watch what is happening in front and behind the machine at the same time. The Vehicle Blackbox DVR has a maximum resolution of 1080P (Full HD).
Turning off the display does not significantly affect the operation of the device. Video recording continues simultaneously from both cameras. At the same time, the screen of the device can already be used as a rear-view mirror. Its surface reflects the view quite well, almost as good as regular mirrors. The rear camera is a small box on a stand, with which the DVR is attached to the car. Most often it is attached outside the car. With this installation, it can be used as a parking sensor. The camera counts the movement backwards and will show markings on the switched-on display that allow you to estimate the distance to obstacles. Sometimes the camera is installed inside the cabin to monitor what is happening in the rear seats.
In addition, Vehicle Blackbox DVR can be used as a camera. With it, you can fix the damage to the car in an accident, or remove the number of the offender’s car. The camera resolution is 1.3 megapixels. The price of the Vehicle Blackbox DVR for the promotion is about 2,000 rubles. This is a fairly low cost for a DVR in general, and for mirror DVRs in particular.

Vehicle Blackbox DVR Installation Instructions

The front camera is installed on the standard car mirror. DVR-mirror Vehicle Blackbox DVR is superimposed on top of the mirror so that nothing interferes with the view of the camera. The device is fixed using the included rubber holders, putting them on the protruding brackets of the Vehicle Blackbox DVR. After installation, you need to make sure that the DVR sits tightly and does not stagger. Next, you need to connect the device to the power of the car. Charging cable for the DVR is included. The plug from one end is connected to the DVR in the micro USB connector. The adapter from the second end is inserted into the cigarette lighter socket. After that, you must press the “POWER” button on the display. When connected correctly, the screen will immediately light up.The place for installing a rear view camera may differ depending on the brand of the car and the needs of the motorist. To use the camera as a parking sensor, you need to install it above the license plate of the car. The camera can also be installed inside the car, mounted on the ceiling and turned towards the rear windows or the passenger compartment. Regardless of the chosen place, the rear view camera is attached using two screws that are included in the package.

Instructions for setting up the DVR

After installation, the user can start setting up the DVR. In order for the device to record video, you need to insert a micro USD card into slot number 11. The Vehicle Blackbox DVR supports cards up to 32 GB.
The setting begins by pressing the “POWER” key (numbered 6 in the diagram). It is responsible for turning the DVR display on and off. The “MENU” button is at number 3 in the diagram. It opens a list of settings where you can adjust the video recording quality, date, motion detection, image brightness and sound recording by the device. The Vehicle Blackbox DVR interface is completely in Russian, making it easy to figure it out without instructions. To use the DVR, you need to set the date and time as a minimum.

1. Press the “MENU” key
2. Using the arrows (keys numbered 4 – down and 5 – up on the diagram) go down to the “Date / Time” item and press the “REC” button (numbered 1 on the diagram) to select.
3. The date will be displayed in the format year/month/day hours:minutes. By successively pressing the “REC” key and selecting the necessary numbers using the arrows, you must set the current date and time.
4. After setting, you need to press the “REC” key again to exit the date editing menu. The changes will take effect immediately.

Some reviews for the Vehicle Blackbox DVR:

If the device is set to the wrong date, in the event of an accident, the record from the dash cam may be invalidated and it will be more difficult to prove the driver’s fault.

Detailed instructions for the Vehicle Blackbox DVR in Russian can be found on the official website and buy it there. It also provides a detailed description of the device interface and solutions to the most common errors when using the DVR.