Digital channel tuning on Philips TVs: how to sort and update

The transition to digital broadcasting is now taking on a global scale, and therefore there is a need to tune channels for this. Philips TVs are among the most popular, so the question of setting up digital channels on them arises quite often.

Setting up digital channels on Philips models before 2011

First of all, you need a built-in tuner for digital TV broadcasting. A separate TV set-top box can also be used for this. The main thing is that the TV was released no earlier than 2005. New and old Philips equipment has a similar digital channel tuning scheme, with the exception of some subtleties.

Automatic digital channel tuning on Philips TVs

The search for TV channels is performed in the following sequence:

1. A TV cable (from a digital , satellite or cable box) is connected to the appropriate antenna jack, and the TV is connected to the network.
2. The power button is pressed to turn on the TV.
3. On the remote control, you need to press the “Home” button with the image of the house.
4. In the TV menu, you must activate the “Configuration” key.
5. Go to the “Installation” section.
6. From the list that appears, select the line “Channel settings”.
7. In the next list, select “Automatic installation”.
8. Press the “Start” button.
9. Select “Reinstall” to search for all available TV channels and save them.
10. The user must make a country selection. First you need to familiarize yourself with the information printed on the sticker on the back of the device, with the list of countries with the possibility of broadcasting digital television according to Philips. In the absence of Russia in the list, it is recommended to choose a Western European country ( preferably Germany or Finland ).
11. Then the Digital mode selection window opens. This contains items for cable broadcasting or using a conventional antenna.
12. When you select the search mode, you should select “Automatic”.
13. Press the “Start” button.
14. At the end, click “Finish”.

If a password is required during installation, you can use the standard combinations (0000, 1111, 1234) or another secret code set by the user.

Manual setting

For some reason, auto-tuning of digital channels on a Philips TV released before 2011 may fail. In this case, it is recommended to use the manual setting of the package of digital TV channels:

1. Connects a digital TV cable (for satellite, cable or digital broadcast).
2. The TV connects to the network and turns on.
3. Use the “Home” button on the remote control.
4. In the settings, you need to go to “Configuration” to go to the settings.
5. Select “Channel settings” from the list.
6. The manual mode is being set.
7. The “Start” button is activated.
8. Changes to “Digital Mode”.
9. If a set-top box with a conventional antenna will be used, then you need to press the “Antenna” button. If the broadcast will be carried out by the provider, then the second section is selected – “cable”.
10. You need to return to the previous section to search for TV channels.
11. The value of the first frequency is entered (the provider owns this information), after a while you will need to confirm your actions.
12. When digital channels are found, it will be your turn to enter the value of the following frequency values ​​until all necessary TV channels have been searched.
13. All settings are saved.

Setting up digital channels on modern Philips TVs

Before starting this process, you must first obtain information about the frequency of the TV broadcast from the service provider.

Automatic

Autotuning has the following steps:

1. The remote control opens the menu and the “Settings” section.
2. You need to find a command to search for TV channels.
3. The “Reinstall Channels” tab is activated.
4. The state is chosen. On the back of the TV, there is a sticker with a list of countries broadcasting digital TV. If Russia is not there, then it is better to choose one of the Western European countries (for example, Finland, Sweden or Germany). Press “OK”.
5. After selecting a country, a tab with a digital mode appears.
6. The next thing to note is the DVB-C cable.
7. In the window with information about the service provider, the item “Other” opens.
8. Goes to settings.
9. On the “Quick” line, frequency scanning is activated.
10. In network frequency mode, the setting is done manually.
11. In the “Frequency” line, enter the value 290.00 MHz (or another).
12. Speed ​​- 6.875 (or other).
13. Enter 256 in the QAM modulation line.
14. Then you need to return to the previous menu and start auto tuning.
15. All found channels are saved.

It is recommended that you check with your cable operator for scan rate, symbol rate and frequency offset.

Watch the video on automatically setting up a Philips TV using the example of model 42PFL3007H / 60 (2012 release): https://youtu.be/K48OMb0Z4Yw

Manual

The process for manually tuning TV channels on Philips TVs manufactured after 2011 is exactly the same as on earlier models. How to set up digital channels manually is shown in the video below: https://youtu.be/xkzfPCaTdv0

The network frequency may differ from the advertised one, so if the channel setup was unsuccessful, you should check with your cable provider for the frequency.

Digital channel tuning on Philips Smart TVs

The latest models of this brand have
a Smart TV function . To set up digital channels, you should take into account the presence of all, even the most insignificant, differences and subtleties. To set up a Philips TV to receive cable or digital TV broadcasts, there is a certain procedure:

1. In the TV menu, you need to press “Installation” and go to “Search for TV channels”.
2. Proceed to the next section and follow the automatic prompts.
3. The setup system will prompt you to select a country according to the instructions on the back of the TV set. If the PFL symbol is present, Sweden is selected because this model is made there. For other models, this is France or Finland.
4. Go to the section “Digital mode” – DVB-C cable.
5. At the direction of the system, you will be asked to change some settings.
6. In the open menu window, the speed value is 6750 (or otherwise).

After the completed actions, the user can proceed to a quick or full scan. In the first case, the search time is no more than 10 minutes. The second option will take about half an hour, but during this time all available TV and radio channels will be searched.
Quick Scan :

1. The frequency drop is set to no more than 8 MHz.
2. It is necessary to disable analog channels if they were configured earlier, click the “Finish” button and confirm the start of automatic search.

Full Scan :

1. In network frequency mode, select manual tuning.
2. Set the frequency to 298 MHz.
3. Confirm start of search.

In the user’s TV menu, there may be slight differences from the proposed setting option. In this situation, you need to find tabs that are similar in meaning. If the TV asks for a search step, 8 Mg must be entered. With full observance of the algorithm, you can independently configure all digital channels. https://youtu.be/c5y3xXOMc5c Digital channel tuning on Philips TVs can be automatic or manual. Its features depend on the year of manufacture of the model. Installing digital channels on Philips Smart TVs is the same as on regular TVs.