How to distribute the Internet from your phone to TVs of different brands

To connect a TV to the Internet, they do not always use a wired connection and Wi-Fi. An ordinary telephone can also act as an access point. It is only important to know how to properly distribute the Internet from it.

How to distribute the Internet from an Android phone to a TV

Modern TVs can be used not only for watching movies and TV series. If they have the function of connecting to wireless networks, and most modern devices have it, the TV can be used as a computer or
game console . However, for this he needs a stable internet connection. If, for one reason or another, it is not possible to connect the TV to wired or wireless networks in the room, you can use a phone or tablet as an access point.
Android devices have the ability to distribute the Internet. Both computers and laptops and TVs can connect to them. For this you need:

1. Connect your phone to a mobile network with the ability to distribute the Internet. Most of the operator’s tariffs for Internet distribution are charged per megabyte. The subscriber is given the opportunity to distribute only a certain amount of Internet per day. This should be taken into account when the subscriber starts using his phone as an Internet access point for the TV.
2. Disable the Wi-Fi reception function. This can be done in the appropriate section of the phone settings.
3. Go to advanced network settings.
4. Click on the item “Modem mode”.
5. Activate the “Access Point” function. This is done by moving the slider in the appropriate section.
6. If desired, you can change the value of the “Save access point” item. In the standard version, the value “Always on” is set here. If the subscriber changes it to “5 minutes”, then 5 minutes after disconnecting the TV from the phone, the access point will automatically turn off. This saves battery power.
7. You can set the type of data encryption. It is either WPA2 PSK or WEP. The first is fast and reliable. The second is more suitable for legacy devices.
8. To prevent unauthorized persons from using the access point, it is recommended to set a password. This can be done in the appropriate section of the settings.
9. In order for the settings not to be lost, you need to click on the “Save” button.

On some phones, it is possible to use not a mobile connection, but a signal from a router as an Internet source. In this case, the device will act as a Wi-Fi repeater. However, this scheme is considered complex and unsafe.

Do not forget that when Wi-Fi is activated on Android, the battery consumption level and the load on the processor increase. The result can be a rapid heating of the phone and the emergence of the need to replace the battery.

How to distribute the Internet from an iPhone phone to TVs of different brands via wi-fi

IOS devices can also be used as a means of connecting the TV to the Internet. You can configure the access point in the “Cellular” section. Next, you need to go to the item “Cellular data”. To activate the function, you need to drag the slider opposite the title. Then, like on Android, you need to enable “Modem Mode”. To do this, follow these steps:

1. The “Modem mode” section opens in the menu of available settings.
2. The user goes to the “Password” section, where he enters a certain combination of letters and numbers to protect his phone from the possibility of connecting unauthorized devices.
3. After entering the password, press the “Finish” button. Otherwise, the data will not be saved.
4. In modem mode, data transmission is activated.
5. The person goes to the “Turn on Wi-Fi and Bluetooth” section.
6. Signal transmission via Bluetooth is deactivated. This allows you to reduce battery consumption and keep your phone charged longer.

After that, all that remains is to connect the TV to a new access point. After the connection is established, a notification will appear on the phone screen that a new device has been connected to it. Here, in constant mode, there will be information about the number of TVs, PCs, etc. that use the phone as an Internet access point. How to enable modem mode in Iphone: https://youtu.be/g1K0bNyO45Y

How to distribute the Internet from your phone to different brands of TV of different years of release

In the standard version, the TV is connected to the Internet through the “Wireless networks” section of the device settings. However, depending on the specific brand of equipment, there may be various nuances associated with this process. How to distribute the Internet from your phone to a TV of Samsung Smart TV models of the M series and newer:

1. On the TV, you will need to open the Smart TV settings menu. This can be done by pressing the Home key on the remote control (it shows a stylized house). A menu will appear on the screen. In it you need to select the “settings” section.
2. Then the selection moves to the “General” item.
3. In the window that opens, select “Network”.
4. The user opens “Network Settings”.
5. Because the phone is a wireless Internet access point, the person is required to select the “wireless” option.
6. A list of networks that the TV can potentially connect to appears on the screen. The selection is transferred to the network created on the mobile device. Because most likely it will have the strongest signal available, then its designation will be in one of the top lines.
7. The password that was previously created on the gadget is entered on the keyboard. If a person doubts the correctness of the entry, you can put a tick in the “Show” item. Then the entered characters will not be displayed as dots, but as letters and numbers.
8. At the bottom of the window is the word “Done”. By clicking on it, the user will complete the operation.

How to distribute the Internet from a phone to a Samsung TV of the K series and below (i.e., release earlier than 2016):

1. The first step is to tap on the “Menu” key on the remote control.
2. A window appears in front of the user. The “Network” section is selected here.
3. The network settings open. They are placed in the appropriate section.
4. The Network Type window appears on the screen. There are only two items here: “Wireless” and “Cable”. You need to choose the first one.
5. A list of networks for possible connection appears. The one that was previously created on the mobile is selected.
6. A virtual keyboard appears at the bottom of the screen. By clicking the cursor on the corresponding characters, the person enters the password.
7. After writing it, the “Finish” key is pressed.

How to distribute Internet from phone to LG TV:

1. To connect to a mobile hotspot on your LG TV, you need to open the TV’s basic settings menu.
2. The cursor hovers over the “Network” item.
3. The section “Connecting to a Wi-Fi network” is selected.
4. In the list that opens, you will need to find the name of the mobile access point previously created on the phone.
5. Using the keys on the remote control, the person enters the password.
6. Connection to the network occurs automatically and does not require additional actions from the user.

How to share internet from phone to Philips TV

1. Find “Settings” on the remote key.
2. By pressing it, a person opens a list of available options on the TV screen. Here you need to select the “All settings” section.
3. In the window that opens, select the “Wireless networks” subsection.
4. On the right side of the panel there is a section with the abbreviation “Wi-Fi”. Having opened it, the person presses the “Connect” button.
5. The system will prompt you to select a connection option. To interact with the mobile network, select the “Wireless” option. In the English interface, it is designated as “Wireless”.
6. A window opens where there is a list of devices whose signal the TV can catch. The corresponding network is selected here.
7. The system will ask for a password. It is typed using the remote control keyboard. Then the device will connect to the mobile hotspot.

How to distribute Internet from phone to TV and connect Smart TV to wi-fi on Android and other OS: https://youtu.be/K5MS4GP_xTs

Prerequisites for Internet distribution to work

Most modern TVs have wireless connectivity built in. However, in order for the subscriber to have the opportunity to use the mobile Internet via TV, the latter must have a built-in wireless module. If it is absent (which happens on some models), to connect to Wi-Fi, it must support external USB Wi-Fi adapters.
Wi-fi adapter [/ caption] If this option is absent, the TV must have an Enternet connector, through which a LAN adapter or router can be connected in Wi-Fi receiver mode. When distributing, the phone requires a stable connection to the mobile network and a high signal strength. Data transfer will be immediately terminated if the package of available Gigabytes has run out on the tariff plan.

Common problems

After establishing a connection, the TV cannot access the Internet. Perhaps the mobile operator is blocking the distribution of the Internet to third-party devices, or the data transfer limit has been exhausted on the tariff. You can find out by going to the personal account of the mobile provider and familiarizing yourself with the terms of your tariff in detail.
The image when watching movies “slows down”. Most likely the reason is the low speed of the Internet. Perhaps the signal level is insufficient to transmit a large amount of information, which is required when downloading video files. As a solution to the problem, you can try to move the phone to another place where the connection is better.
The TV shows that the
Wi-
Fi signal is very weak.There may be an obstacle between the phone and the TV that prevents signal propagation. Such problems can arise even due to interior walls of medium thickness. To increase the signal strength, you can try placing the devices in close proximity to each other. If for some reason it is not possible to connect the TV to the landline Internet, the telephone can easily become an access point. This practice is often used. The only thing – before that, it is better to familiarize yourself in detail with the terms of your tariff plan, so as not to inadvertently go into negative territory.