Connecting and Using the JVC TV Remote

JVC is a Japanese company engaged in the production of equipment of various kinds, including televisions and remote controls (RC) for them. In the article we will tell you about the features of the interconnection of these devices, and how to properly connect them to each other and configure them.

Instructions for using the remote control for TV JVC

To successfully use the JVC TV remote control, you need to know the design of its buttons, the channel tuning algorithm, and other instructional points.

JVC Remote Design/Button Description

All TV functions are controlled by the JVC TV receiver remote control via the menu displayed on the screen.

While setting up your JVC TV, prompts appear in the form of notifications at the bottom of the screen. After a few seconds of inactivity, the menu will automatically disappear from the display.

The JVC TV remote control has the following buttons:

Tuning TV channels with the remote control

With the advent of digital TV, many people are having difficulty tuning digital channels on their JVC TV. To set up the digital on your TV yourself, connect the cable from the antenna to the TV jack and do the following:

1. Point the remote at the TV and press the Menu key.
2. Go to the “Channels” section using the left/right toggle buttons.
3. Select “Cable” (if connected to such an operator and want to set up DVB-C) or “Antenna” (to set up DVB-T2 digital television).
4. Click “Auto Search”.
5. Select the broadcasting country – Russia.
6. Select the search type “Full” if you are installing cable channels.
7. Click “Start” and wait for the search to complete. After it ends, the first channel will turn on.

How to disassemble the remote from JVC?

You may need to disassemble the remote control, for example, if the buttons become hard to press, or you just want to clean the remote control from dust – as a preventive measure. How to:

1. Open the battery compartment and remove the batteries. Look carefully if there is any additional fastening in the form of screws, if there is, use a screwdriver.
2. Use a flat blade screwdriver to avoid damaging the top and bottom of the case. With its help, pry off the plastic and lead along the body, snapping off the fasteners. Sometimes two screwdrivers are needed because the frame is very tight.
3. Pay attention to the rubber band with buttons. No, it is not glued to the board, as it might seem. Although it may not be possible to separate them immediately, so start carefully, from the corners – so as not to damage anything.
4. Start cleaning. Use an old toothbrush and laundry soap (ideally). Lather the brush, clean the gum thoroughly and rinse with water. Be careful not to break the buttons. A properly washed item should not stick to your hands. It can be dried with a hair dryer or wiped with a towel.
5. To clean the board, use a nail polish remover – it dries very quickly, washes well and leaves no residue. Wet the cotton, wipe it off, wait for the board to dry, and repeat the procedure. Buy a liquid for cleaning that does not contain “fats and oils”, it works better.
6. After the remote control parts are washed and dried, reassemble all the parts as they were, and enjoy the result. If everything is done correctly, the remote will become like new and the buttons will be easy to press.

How to connect and set up a universal remote control for JVC?

The JVC universal remote can control several devices at once, including equipment from Rostelecom. We will analyze in detail the connection and configuration of the remote control to the TV, but by repeating the steps below for other devices, you can control all the equipment from one remote control. Actions are as follows:

1. Insert batteries into the remote. Most generic models come with batteries, but you may need to buy your own. The correct battery type must be indicated on the packaging of the device. If not, look at the battery cover.
2. Before setting up the remote control, turn on the TV using the buttons on the old remote control or the body of the TV receiver itself.
3. Enter device programming mode. How to get into it should be indicated on the TV case or in the instructions for it. This is usually done by pressing a button or a combination of buttons such as SET and POWER.
4. Press the TV key. Depending on the remote control model, you may need to hold the button for a different amount of time until the indicator lights up.
5. Enter the device code. It can be found in the controller manual, or in the table below. To configure the remote control for a specific TV model, you need to identify it by entering this combination from the remote control. After entering the correct password, the backlight of the remote control turns on.

There are universal remote controls (UPDU) that have a built-in learning mode: they themselves are configured to control those devices that are turned on next to them. If your remote has this feature, see your owner’s manual for how to enable it.

Many universal remotes forget all settings if both batteries are removed from them. Therefore, it is necessary to replace the batteries one by one. This provides sufficient power to the device so that the general remote control settings are not erased.

Code table for different model ranges of the JVC telebrand:

For an old JVC TV, try the options: 0167, 1698, 0262, 1697, 0316, 1696, 0404, 1622, 0415, 1479, 0444, 1470, 0502.

If you plan to connect a third-party universal remote to your JVC TV, you will need to find the code for it. Just type in the search, for example, “JVC TV code for the Dexp universal remote”, and by searching, find the right combination.

Where and how to buy a suitable remote control for JVC?

Many owners of electronic equipment notice that the remote control fails faster than the device it controls. This is because remote controls often operate in harsh environments. Water is spilled on it, it is dropped, dust accumulates inside. No wonder the remote needs to be changed. The JVC instrument is no exception.

You can buy or order remotes for JVC in specialized stores and marketplaces – Avito, Valberis, Yandex.Market, etc.

original remotes

Before buying a JVC remote, you need to know exactly the model of your TV device and its operating system (for example, Android Smart TV). Each remote is suitable for a specific line. For example, the JVC rm c1261 remote control works with AV-1404FE TVs, and will not work with others.

If you make a mistake in choosing, you will end up with a useless tool. Therefore, before buying, it is recommended to consult with a qualified specialist. Especially when it comes to the old JVC remote control.

You can buy remote control models today: c 21ze, av g21t, av 14at, rm c360gy, av g29mx, lt 32m585, av 25ls3, av 21me, kt1157 sx, etc.

Selecting a universal remote

The term “universal remote” covers a large number of devices with completely different purposes and functions. When choosing, it is worth starting with setting goals: what exactly is the remote control for? There are usually two options:

• First. Purchased to replace a lost/broken/gnawed native remote control. In this case, it is better to choose the original version, since the universal remote control may not be able to give all the commands that the TV is capable of performing.
• Second. The UPDU is purchased as a single remote for all devices, while all their native remotes are available. The main thing here is that you can give basic commands (on / off, add / subtract, etc.). It is better to pay attention to the model of the universal remote control with the learning function.

When choosing, check if your devices are in the list of supported by this or that universal remote control.

Download remote control for JVC TV for Android and iPhone for free

You can download the online remote control for JVC TV on both Android (via PlayStore) and iOS (via AppStore). To install, do the following:

1. Search the app store for the app by searching for “TV remote” and install it.
2. After installing the app on your phone, open it and connect it to your TV. In the settings, select the model name of your TV. Wait for auto-sync.
3. The TV can now be controlled using the app on the smart device.

Among the general options and advantages of online remotes, there is a comfortable keyboard for text input, voice input and multi-touch for simultaneous solving of different tasks. In fact, the program becomes a complete and functional analogue of a physical remote control.

What should I do if my JVC TV does not respond to the remote/remote does not work?

First make sure the TV on/off button has been activated. To do this, press the button/joystick on the back of the TV receiver to see if it responds:

• if the TV responds, go to the section “Checking the functionality of the remote control”;
• if not, go to the “Checking the functionality of the TV” section.

Make sure that the distance between the remote control and the front of the TV does not exceed seven meters. The problem may lie in this.

Checking the functionality of the remote control

To check if the remote control works properly, first change the batteries. This is a commonplace, but the most common reason for the remote control to fail to work. If nothing has changed with the new batteries, check the remote control with a digital camera or a camera on a smart device. Infrared light is invisible to the human eye, but visible when viewed through the screen of a camera or smart device. How to do the test:

1. Turn on the camera.
2. Aim the infrared LED of the remote control at the camera lens.
3. Press the button on the remote. With this action, a white light should appear on the camera/phone screen.

iPhone/iPad phones are not able to perform this test because they have IR filters.

If the LED does not light up – the remote control is not working properly, please contact the support service on the details below. If the indicator light works, the remote control is OK. Go to the “Checking the functionality of the TV” section.

Checking the functionality of the TV

If the previous steps did not help, you need to reset the device. After it, the TV will go to the initial state of “default”. To reset:

1. Disconnect all cables and accessories from the TV, such as antennas, HDMI cables, CI+ modules, surround sound systems, etc.
2. Unplug the power cord and wait a minute until the LED turns off. Reconnect the plug to the socket. Turn on the TV with the remote control. If the TV does not respond, do this with the button on the body of the TV itself.

If the TV turns on and the remote control works again, you can reconnect external devices to the TV receiver one by one. Verify that each instrument has successfully connected. If the remote control still does not work, check if the TV software is up to date.

If the TV still does not start or does not respond to the remote control, contact support.

Contacting Support

If the TV does not respond to the remote control after following the steps above, please contact JVC professional support. If possible, have the following information ready before calling/writing:

• TV model.
• Purchase date.
• TV serial number.

Contacts for communication:

• hotline phone: +7(495)589-22-35 (the same for all of Russia);
• e-mail: info@jvc.ru.

Before contacting the service center, read the extracts from the user manual:

• No picture, no sound. Turn off the “Blue background” option if it is enabled.
• Bad picture. Choose the correct color system. Adjust the color and brightness settings.
• The menu doesn’t work. Press the TV/VIDEO button to return to TV mode and try to enter the menu again.
• The buttons on the front panel do not work. If you have child lock enabled, disable it.

Controlling a JVC TV without a remote

The remote control simplifies the use of the TV. With it, you can easily change channels, make settings, adjust parameters such as sound, etc. But what if it breaks or runs out of power? There is a way out – control buttons on the device itself. To learn how to set up a TV without a remote control, you need to know the standard values ​​u200bu200band keys. They are the same in all JVC TVs:

• Inclusion. POWER button. It is located in a separate place and is usually larger than the rest of the keys.
• Go to menu. Key with the name MENU. In some TV models, it is still used to turn on the TV, only in this case it should be held for 10-15 seconds.
• Action confirmation. OK key. Sometimes you have to double-click on it to confirm your selection.
• Channel switching. CH+ and CH- buttons. They are placed next to each other. They are also used for menu navigation.
• Volume control. The buttons are labeled + and -, or VOL+ and VOL-. Also used for navigation.

Separately, in older models of TVs there is a button for switching the signal source – “AV”. In newer versions, the broadcast source is selected via the menu.

From the description of the main keys, it is clear that they can be used to turn the device on / off, increase or decrease the volume, switch channels and enter the settings. The exception is the switching and control of the receiver, for which it is necessary to have a separate remote control.

Setting up an old JVC TV

Setting each parameter without a remote control is performed according to the algorithm presented above. Basic options are provided for all TVs:

• Search and tune channels. Can be performed automatically or manually via the “Menu”. After that, you need to confirm the settings.
• Contrast, brightness control. The slider in this section is moved using the volume buttons.
• Selecting a signal source. You can reconfigure technical parameters such as the broadcast frequency.

After each setting, you must use the “OK” key to save the operation. If this is not done, all entered parameters will be reset immediately after exiting the menu.

How to zoom out on JVC 2941se?

You need to zoom out when the picture looks stretched or does not fit completely on the screen. You can fix this, including using the buttons on the TV. What to do:

1. Press the MENU button on the TV case.
2. Use the volume up button to navigate to the “Picture” line. Click OK.
3. Select “Picture Size”/”Image Format” (item name may vary).
4. Use the same buttons to select the correct aspect ratio. For example, set to “Widescreen” or “16:9”.
5. Use the OK button to save your settings and exit the menu. After adjusting, the TV picture size should match the correct aspect ratio.

Connecting and setting up the remote to your JVC TV is easy. It is important to read the instructions carefully and follow their steps. If there is any problem at the connection stage, or during the operation of the remote control, and you cannot solve it yourself, contact support.